Projeto Integrador - 2009.2 - Equipe Epsilon
Revisão de 00h23min de 27 de novembro de 2009 por Guilhermecravo (discussão | contribs) (→Instalação do Servidor Ubuntu versão 9.10)
24/11/2009
Escolha do nome da equipe = Épsilon
Instalação do Servidor Ubuntu versão 9.10
- Usado o servidor DHCP do Laboratório Redes I para atualização dos serviços do servidor
sudo apt-get update
Instanlado ssh
sudo apt-get install ssh
Configuração de teste na interface eth0
sudo ifconfig 200.135.37.115 netmask 255.255.255.0
Discussão do desenvolvimento do projeto
Teste do GRAPHVIZ
<graphviz>
digraph PI { CAB -> IER IER -> GAR GAR -> PRC IER -> PRC
} </graphviz>
25/11
Apresentação do projeto, parte de IER
Configurado as interfaces
eth0 address 200.135.37.115 netmask 255.255.255.0 network 200.135.37.0 broadcast 200.135.37.255 gateway 200.135.37.1 dns-nameserves 200.135.37.1
eth1 address 172.115.1.1 netmask 255.255.255.0 network 172.115.1.0 broadcast 172.115.1.255
eth1.1 address 192.168.1.220 netmask 255.255.255.0
Instalado Hotspot no servidor
wget http://nocat.net/downloads/NoCatAuth/NocatAuth-nightty.tgz
Configurado resolv.conf
vim /etc/resolv.conf domain REDES1 search REDES1 nameserver 200.135.37.65
- Sequencia de comandos para o hotspot
tar zvxf NocatAuth-x.xx.tar.gz cd NocatAuth-x.xx make gateway cd /usr/local/nocat vim nocat.conf *verifcado linhas 22 alterado GatewayName Epsilon 125 130 141 150 160 168 176 183 alterado como RoteOnly 1 193 201 alterado como MemberOnly 1 211 226
- Hotspot ainda precisa ser configurado em alguns tópicos.
26/11
Instalação de serviços
- APACHE
sudo apt-get install apache2
- DHCP
sudo apt-get install dhcpd3-server
- PHP
sudo apt-get install php5 php5-mysql
- MYSQL
sudo apt-get install mysql-server
- DNS
sudo apt-get install bind9
- POSTFIX e IMAP
sudo apt-get install postfix dovecot-imapd
- CACTI
sudo apt-get install cacti
Configuração DNS
configurado arquivo /etc/bind/named.conf.local
zone "epsilon.sj.ifsc.edu.br" { type master; file "/etc/bind/epsilon.sj.ifsc.edu.br"; }; zone "37.135.200.in-addr.arpa" { type master; file "/etc/bind/37.135.200.in-addr.arpa"; };
configurado arquivo /etc/bind/epsilon.sj.ifsc.edu.br
$TTL 86400 ; Start of Authority: início de autoridade @ IN SOA dns1.epsilon.sj.ifsc.edu.br. epsilon.sj.ifsc.edu.br. ( 2009112600 ; Serial 1d ; Refresh 4h ; Retry 1w ; Expire 1d ) ; Negative Cache TTL ; ; Name Server: servidores DNS @ IN NS dns1 @ IN MX 0 mail @ IN A 200.135.37.115 ; ; Address: endereço dns1 IN A 200.135.37.115 mail IN A 200.135.37.115 www IN A 200.135.37.115 ; ; Canonical Name: "epsilon" web IN CNAME www
configurado arquivo /etc/bind/37.135.200.in-addr.arpa
$TTL 86400 ; Start of Authority: início de autoridade @ IN SOA dns1.epsilon.sj.ifsc.edu.br. epsilon.sj.ifsc.edu.br. ( 2009112601 ; Serial 1d ; Refresh 4h ; Retry 1w ; Expire 1d ) ; Negative Cache TTL ; ; Name Server: servidores DNS @ IN NS dns1.epsilon.sj.ifsc.edu.br. ; ; Address: endereço 1 IN PTR dns1.epsilon.sj.ifsc.edu.br. 3 IN PTR mail.epsilon.sj.ifsc.edu.br. 100 IN PTR www.epsilon.sj.ifsc.edu.br.
Editado o arquivo /etc/network/interfaces
# The loopback network interface auto lo iface lo inet loopback
# Interface externa auto eth0 iface eth0 inet static address 200.135.37.115 netmask 255.255.255.0 network 200.135.37.0 broadcast 200.135.37.255 gateway 200.135.37.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 200.135.37.1
# Interface Interna
auto eth1 iface eth1 inet static address 172.20.1.1 netmask 255.255.255.0 network 172.20.1.0
# Interface Virtual
auto vlan1 iface vlan1 inet static address 192.168.1.220 netmask 255.255.255.0 vlan_raw_device eth1
# Vlan 501
auto vlan501 iface vlan501 inet static address 172.21.1.1 netmask 255.255.255.0 vlan_raw_device eth1
# Vlan 502
auto vlan502 iface vlan502 inet static address 172.22.1.1 netmask 255.255.255.0 vlan_raw_device eth1
# Vlan 503
auto vlan503 iface vlan503 inet static address 172.23.1.1 netmask 255.255.255.0 vlan_raw_device eth1
# Vlan 504
auto vlan504 iface vlan504 inet static address 172.24.1.1 netmask 255.255.255.0 vlan_raw_device eth1
Criado um script simples para salvar configurações já setadas até o momento:
#!/bin/bash nome=backup-txt-`date +%Y_%m_%d-_%H_%M`.txt touch $nome echo "**** INTERFACES DE REDE ****" >> $nome echo >> $nome ifconfig -a >> $nome echo >> $nome echo "**** ROTAS ****" >> $nome echo >> $nome route -n >> $nome echo >> $nome echo "**** Arquivo Resolv.conf ****" >> $nome echo >> $nome cat /etc/resolv.conf >> $nome echo >> $nome echo "**** HOTSPOT ****" >> $nome echo >> $nome cat /usr/local/nocat/nocat.conf >> $nome echo >> $nome echo "**** DNS ****" >> $nome echo >> $nome echo "/etc/bind/named.conf.local" >> $nome cat /etc/bind/named.conf.local >> $nome echo >> $nome echo "/etc/bind/epsilon.sj.ifsc.edu.br" >> $nome cat /etc/bind/epsilon.sj.ifsc.edu.br >> $nome echo >> $nome echo "/etc/bins/37.135.200.in-addr.arpa" >> $nome cat /etc/bind/37.135.200.in-addr.arpa >> $nome echo >> $nome
Adicionado ao Crontab a execução do script de backup simples e a sincronização do relógio do servidor:
vim /etc/crontab 00 23 * * * root /backup/scripts/txback.sh bash 1 * * * * root ntpdate ntp.cais.rnp.br