Telecom20162 pji3 configuracoes

NOVO LINK: http://bit.ly/pji320162-config

Link da matéria: PJI11103-2016-2 (alternativo)

Desatualizado
1 Operadora > Arquivo de configuração das interfaces de redes /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback Onboard interface auto eth0 iface eth0 inet manual bond-master bond0 bond-use-carrier 1 Offboard interface auto eth1 iface eth1 inet manual bond-master bond0 bond-use-carrier 1 Bonding auto bond0 iface bond0 inet manual bond-slaves none bond-lacp-rate fast bond-mode 802.3ad bond-xmit_hash_policy layer2+3 bond-miimon 100 auto bond0.10 iface bond0.10 inet static address 192.168.10.10 netmask 255.255.255.0 auto bond0.20 iface bond0.20 inet static address 192.168.20.10 netmask 255.255.255.0 auto bond0.30 iface bond0.30 inet static address 200.135.37.125 netmask 255.255.255.192 gateway 200.135.37.126 dns-nameservers 8.8.8.8 8.8.4.4 auto bond0.40 iface bond0.40 inet static address 192.168.40.10 netmask 255.255.255.0 </syntaxhighlight> > Arquivos de configuração do PPPOE pasteltelecom@concentradoracesso:~$ cat /etc/ppp/peers/adsl cat: /etc/ppp/peers/adsl: Arquivo ou diretório não encontrado pasteltelecom@concentradoracesso:~$ cat /etc/ppp/pppoe-server-options require-chap noauth login lcp-echo-interval 10 lcp-echo-failure 2 ms-dns 200.135.37.65 netmask 255.255.255.0 noipdefault debug kdebug 4 pasteltelecom@concentradoracesso:~$ sudo cat /etc/ppp/chap-secrets Secrets for authentication using CHAP client server secret IP addresses usuario1 * senha1 pasteltelecom@concentradoracesso:~$ cat /etc/ppp/faixa-ip 10.0.0.2-254 </syntaxhighlight> > Arquivo script de inicialização /etc/rc.local !/bin/sh -e rc.local This script is executed at the end of each multiuser runlevel. Make sure that the script will "exit 0" on success or any other value on error. In order to enable or disable this script just change the execution bits. By default this script does nothing. killall pppoe-server # Mata qualquer processo pppoe rodando pppoe-server -C pji -L 10.0.0.1 -p /etc/ppp/faixa-ip -I bond0.40 # Cria um novo processo pppoe sysctl -w net.ipv4.conf.all.forwarding=1 # Habilita o roteamento no servidor iptables -t nat -A POSTROUTING -o bond0.30 -j MASQUERADE # Configura o NAT exit 0 </syntaxhighlight> > VLANS no Switch da Operadora Switch2#show vlan VLAN Name Status Ports -------------------------------- --------- ------------------------------- 1 default active Gi1/0/25, Gi1/0/26, Gi1/0/27 Gi1/0/28 10 VLAN0010 active Gi1/0/3, Gi1/0/4, Gi1/0/5 Gi1/0/6, Gi1/0/7, Gi1/0/8 Gi1/0/9, Gi1/0/10, Gi1/0/11 Gi1/0/12 20 VLAN0020 active Gi1/0/13, Gi1/0/14, Gi1/0/15 Gi1/0/16, Gi1/0/17, Gi1/0/18 Gi1/0/19, Gi1/0/20, Gi1/0/21 Gi1/0/22 30 VLAN0030 active Gi1/0/2 40 VLAN0040 active Gi1/0/1 </syntaxhighlight> > Interface PO 1 do Switch da Operadora Switch2#show running-config interface port-channel 1 Building configuration... Current configuration : 97 bytes	interface Port-channel1 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk end </syntaxhighlight> > Resumo das interfaces do Switch da Operadora Switch2#show running-config interface gigabitEthernet 1/0/1 Building configuration... Current configuration : 89 bytes	interface GigabitEthernet1/0/1 switchport access vlan 40 switchport mode access end Switch2#show running-config interface gigabitEthernet 1/0/2 Building configuration... Current configuration : 89 bytes	interface GigabitEthernet1/0/2 switchport access vlan 30 switchport mode access end Switch2#show running-config interface gigabitEthernet 1/0/23 Building configuration... Current configuration : 134 bytes	interface GigabitEthernet1/0/23 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk channel-group 1 mode active end Switch2#show running-config interface gigabitEthernet 1/0/24 Building configuration... Current configuration : 134 bytes	interface GigabitEthernet1/0/24 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk channel-group 1 mode active end </syntaxhighlight> > Interfaces de uso geral do Switch da Operadora As interfaces de 1/0/3 a 1/0/12 estão na VLAN 10 no modo access As interfaces de 1/0/13 a 1/0/22 estão na VLAN 20 no modo access interface GigabitEthernet1/0/12 switchport access vlan 10 switchport mode access	interface GigabitEthernet1/0/13 switchport access vlan 20 switchport mode access </syntaxhighlight> DHCP root@concentradoracesso:/home/pasteltelecom# cat /etc/dhcp/dhcpd.conf default-lease-time 600; max-lease-time 7200; subnet 192.168.10.0 netmask 255.255.255.0 { # # Faixa de IPs disponíveis: range 192.168.10.100 192.168.10.199; # # Máscara de rede option subnet-mask 255.255.255.0; # #Endereço de 'broadcast' option broadcast-address 192.168.10.255; # #Endereço do roteador option routers 192.168.10.10; # #DNS option domain-name-servers 200.135.37.65; } subnet 192.168.20.0 netmask 255.255.255.0 { # # Faixa de IPs disponíveis: range 192.168.20.100 192.168.20.199; # # Máscara de rede option subnet-mask 255.255.255.0; # #Endereço de 'broadcast' option broadcast-address 192.168.20.255; # #Endereço do roteador option routers 192.168.20.10; # #DNS option domain-name-servers 200.135.37.65; } root@concentradoracesso:/home/pasteltelecom# cat /etc/default/isc-dhcp-server Defaults for isc-dhcp-server initscript sourced by /etc/init.d/isc-dhcp-server installed at /etc/default/isc-dhcp-server by the maintainer scripts This is a POSIX shell fragment Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf). DHCPD_CONF=/etc/dhcp/dhcpd.conf Path to dhcpd's PID file (default: /var/run/dhcpd.pid). DHCPD_PID=/var/run/dhcpd.pid Additional options to start dhcpd with. Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead OPTIONS="" On what interfaces should the DHCP server (dhcpd) serve DHCP requests? Separate multiple interfaces with spaces, e.g. "eth0 eth1". INTERFACES="bond0.10 bond0.20" </syntaxhighlight> 2 GALPÃO > Configuração das interfaces de rede root@galpaocrioulo:~# cat /etc/network/interfaces source /etc/network/interfaces.d/* auto lo iface lo inet loopback auto eth0 iface eth0 inet manual bond-miimon 100 bond-use-carrier 1 auto eth1 iface eth1 inet manual bond-miimon 100 bond-use-carrier 1 auto bond0 iface bond0 inet manual bond-slaves eth0 eth1 bond-lacp-rate fast bond-mode 802.3ad bond-xmit_hash_policy layer2+3 post-up ip link set bond0 up auto bond0.10 iface bond0.10 inet static address 192.168.10.1 netmask 255.255.255.0 auto bond0.20 iface bond0.20 inet static address 192.168.20.1 netmask 255.255.255.0 auto bond0.30 iface bond0.30 inet static address 192.168.30.1 netmask 255.255.255.0 gateway 192.168.30.254 </syntaxhighlight > Configurações do DHCP root@galpaocrioulo:~# cat /etc/dhcp/dhcpd.conf default-lease-time 600; max-lease-time 7200; subnet 192.168.1.0 netmask 255.255.255.0{ option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; option routers 192.168.1.1; option domain-name-servers 200.135.37.65; range 192.168.1.101 192.168.1.106; } root@galpaocrioulo:~# cat /etc/default/isc-dhcp-server Defaults for isc-dhcp-server initscript sourced by /etc/init.d/isc-dhcp-server installed at /etc/default/isc-dhcp-server by the maintainer scripts This is a POSIX shell fragment Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf). DHCPD_CONF=/etc/dhcp/dhcpd.conf Path to dhcpd's PID file (default: /var/run/dhcpd.pid). DHCPD_PID=/var/run/dhcpd.pid Additional options to start dhcpd with. Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead OPTIONS="" On what interfaces should the DHCP server (dhcpd) serve DHCP requests? Separate multiple interfaces with spaces, e.g. "eth0 eth1". INTERFACES="bond0" </syntaxhighlight> > VLANS no Switch do Galpão Switch#show vlan VLAN Name Status Ports -------------------------------- --------- ------------------------------- 1 default active Gi1/0/1, Gi1/0/2, Gi1/0/3 Gi1/0/10, Gi1/0/11, Gi1/0/12 Gi1/0/13, Gi1/0/14, Gi1/0/15 Gi1/0/16, Gi1/0/17, Gi1/0/18 Gi1/0/19, Gi1/0/20, Gi1/0/21 Gi1/0/22, Gi1/0/25, Gi1/0/26 Gi1/0/27, Gi1/0/28 10 WI-FI active Gi1/0/8, Gi1/0/9 20 Visitantes active Gi1/0/6, Gi1/0/7 30 intra active Gi1/0/4, Gi1/0/5 </syntaxhighlight> > Interfaces do Switch do Galpão interface GigabitEthernet1/0/1	interface GigabitEthernet1/0/2	interface GigabitEthernet1/0/3	interface GigabitEthernet1/0/4 switchport access vlan 30 switchport mode access	interface GigabitEthernet1/0/5 switchport access vlan 30 switchport mode access	interface GigabitEthernet1/0/6 switchport access vlan 20 switchport mode access	interface GigabitEthernet1/0/7 switchport access vlan 20 switchport mode access	interface GigabitEthernet1/0/8 switchport access vlan 10 switchport mode access	interface GigabitEthernet1/0/9 switchport access vlan 10 switchport mode access	interface GigabitEthernet1/0/10	interface GigabitEthernet1/0/11	interface GigabitEthernet1/0/12	interface GigabitEthernet1/0/13	interface GigabitEthernet1/0/14	interface GigabitEthernet1/0/15	interface GigabitEthernet1/0/16	interface GigabitEthernet1/0/17	interface GigabitEthernet1/0/18	interface GigabitEthernet1/0/19	interface GigabitEthernet1/0/20	interface GigabitEthernet1/0/21	interface GigabitEthernet1/0/22	interface GigabitEthernet1/0/23 switchport trunk allowed vlan 10,20,30 switchport mode trunk channel-protocol lacp channel-group 1 mode active	interface GigabitEthernet1/0/24 switchport trunk allowed vlan 10,20,30 switchport mode trunk channel-protocol lacp channel-group 1 mode active	interface GigabitEthernet1/0/25	interface GigabitEthernet1/0/26	interface GigabitEthernet1/0/27	interface GigabitEthernet1/0/28	</syntaxhighlight> > Interface PO channel 1 do switch do Galpão interface Port-channel1 switchport trunk allowed vlan 10,20,30 switchport mode trunk </syntaxhighlight>