Mudanças entre as edições de "Telecom20162 pji3 configuracoes"
(13 revisões intermediárias pelo mesmo usuário não estão sendo mostradas) | |||
Linha 1: | Linha 1: | ||
− | + | NOVO LINK: http://bit.ly/pji320162-config | |
+ | Link da matéria: [[PJI11103-2016-2]] ([http://bit.ly/pji320162 alternativo]) | ||
− | + | {{Collapse top | Desatualizado}} | |
− | Operadora | + | == Operadora == |
> Arquivo de configuração das interfaces de redes | > Arquivo de configuração das interfaces de redes | ||
Linha 54: | Linha 55: | ||
address 192.168.40.10 | address 192.168.40.10 | ||
netmask 255.255.255.0 | netmask 255.255.255.0 | ||
+ | </syntaxhighlight> | ||
+ | |||
+ | > Arquivos de configuração do PPPOE | ||
+ | |||
+ | <code> | ||
+ | pasteltelecom@concentradoracesso:~$ cat /etc/ppp/peers/adsl | ||
+ | cat: /etc/ppp/peers/adsl: Arquivo ou diretório não encontrado | ||
+ | pasteltelecom@concentradoracesso:~$ cat /etc/ppp/pppoe-server-options | ||
+ | require-chap | ||
+ | noauth | ||
+ | login | ||
+ | lcp-echo-interval 10 | ||
+ | lcp-echo-failure 2 | ||
+ | ms-dns 200.135.37.65 | ||
+ | netmask 255.255.255.0 | ||
+ | noipdefault | ||
+ | debug | ||
+ | kdebug 4 | ||
+ | |||
+ | pasteltelecom@concentradoracesso:~$ sudo cat /etc/ppp/chap-secrets | ||
+ | # Secrets for authentication using CHAP | ||
+ | # client server secret IP addresses | ||
+ | usuario1 * senha1 | ||
+ | |||
+ | pasteltelecom@concentradoracesso:~$ cat /etc/ppp/faixa-ip | ||
+ | 10.0.0.2-254 | ||
</syntaxhighlight> | </syntaxhighlight> | ||
Linha 180: | Linha 207: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
+ | DHCP | ||
+ | <code> | ||
+ | root@concentradoracesso:/home/pasteltelecom# cat /etc/dhcp/dhcpd.conf | ||
+ | default-lease-time 600; | ||
+ | max-lease-time 7200; | ||
+ | |||
+ | subnet 192.168.10.0 netmask 255.255.255.0 { | ||
+ | # | ||
+ | # Faixa de IPs disponíveis: | ||
+ | range 192.168.10.100 192.168.10.199; | ||
+ | # | ||
+ | # Máscara de rede | ||
+ | option subnet-mask 255.255.255.0; | ||
+ | # | ||
+ | #Endereço de 'broadcast' | ||
+ | option broadcast-address 192.168.10.255; | ||
+ | # | ||
+ | #Endereço do roteador | ||
+ | option routers 192.168.10.10; | ||
+ | # | ||
+ | #DNS | ||
+ | option domain-name-servers 200.135.37.65; | ||
+ | } | ||
+ | subnet 192.168.20.0 netmask 255.255.255.0 { | ||
+ | # | ||
+ | # Faixa de IPs disponíveis: | ||
+ | range 192.168.20.100 192.168.20.199; | ||
+ | # | ||
+ | # Máscara de rede | ||
+ | option subnet-mask 255.255.255.0; | ||
+ | # | ||
+ | #Endereço de 'broadcast' | ||
+ | option broadcast-address 192.168.20.255; | ||
+ | # | ||
+ | #Endereço do roteador | ||
+ | option routers 192.168.20.10; | ||
+ | # | ||
+ | #DNS | ||
+ | option domain-name-servers 200.135.37.65; | ||
+ | } | ||
+ | |||
+ | |||
+ | root@concentradoracesso:/home/pasteltelecom# cat /etc/default/isc-dhcp-server | ||
+ | # Defaults for isc-dhcp-server initscript | ||
+ | # sourced by /etc/init.d/isc-dhcp-server | ||
+ | # installed at /etc/default/isc-dhcp-server by the maintainer scripts | ||
− | -- | + | # |
+ | # This is a POSIX shell fragment | ||
+ | # | ||
+ | |||
+ | # Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf). | ||
+ | #DHCPD_CONF=/etc/dhcp/dhcpd.conf | ||
+ | |||
+ | # Path to dhcpd's PID file (default: /var/run/dhcpd.pid). | ||
+ | #DHCPD_PID=/var/run/dhcpd.pid | ||
+ | |||
+ | # Additional options to start dhcpd with. | ||
+ | # Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead | ||
+ | #OPTIONS="" | ||
+ | |||
+ | # On what interfaces should the DHCP server (dhcpd) serve DHCP requests? | ||
+ | # Separate multiple interfaces with spaces, e.g. "eth0 eth1". | ||
+ | INTERFACES="bond0.10 bond0.20" | ||
+ | </syntaxhighlight> | ||
+ | |||
+ | == GALPÃO == | ||
> Configuração das interfaces de rede | > Configuração das interfaces de rede | ||
Linha 226: | Linha 318: | ||
gateway 192.168.30.254 | gateway 192.168.30.254 | ||
</syntaxhighlight | </syntaxhighlight | ||
+ | |||
+ | > Configurações do DHCP | ||
+ | |||
+ | <code> | ||
+ | |||
+ | root@galpaocrioulo:~# cat /etc/dhcp/dhcpd.conf | ||
+ | default-lease-time 600; | ||
+ | max-lease-time 7200; | ||
+ | subnet 192.168.1.0 netmask 255.255.255.0{ | ||
+ | option subnet-mask 255.255.255.0; | ||
+ | option broadcast-address 192.168.1.255; | ||
+ | option routers 192.168.1.1; | ||
+ | option domain-name-servers 200.135.37.65; | ||
+ | range 192.168.1.101 192.168.1.106; | ||
+ | } | ||
+ | |||
+ | root@galpaocrioulo:~# cat /etc/default/isc-dhcp-server | ||
+ | # Defaults for isc-dhcp-server initscript | ||
+ | # sourced by /etc/init.d/isc-dhcp-server | ||
+ | # installed at /etc/default/isc-dhcp-server by the maintainer scripts | ||
+ | |||
+ | # | ||
+ | # This is a POSIX shell fragment | ||
+ | # | ||
+ | |||
+ | # Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf). | ||
+ | #DHCPD_CONF=/etc/dhcp/dhcpd.conf | ||
+ | |||
+ | # Path to dhcpd's PID file (default: /var/run/dhcpd.pid). | ||
+ | #DHCPD_PID=/var/run/dhcpd.pid | ||
+ | |||
+ | # Additional options to start dhcpd with. | ||
+ | # Don't use options -cf or -pf here; use DHCPD_CONF/ DHCPD_PID instead | ||
+ | #OPTIONS="" | ||
+ | |||
+ | # On what interfaces should the DHCP server (dhcpd) serve DHCP requests? | ||
+ | # Separate multiple interfaces with spaces, e.g. "eth0 eth1". | ||
+ | INTERFACES="bond0" | ||
+ | </syntaxhighlight> | ||
+ | |||
+ | |||
+ | > VLANS no Switch do Galpão | ||
+ | |||
+ | <code> | ||
+ | Switch#show vlan | ||
+ | |||
+ | VLAN Name Status Ports | ||
+ | ---- -------------------------------- --------- ------------------------------- | ||
+ | 1 default active Gi1/0/1, Gi1/0/2, Gi1/0/3 | ||
+ | Gi1/0/10, Gi1/0/11, Gi1/0/12 | ||
+ | Gi1/0/13, Gi1/0/14, Gi1/0/15 | ||
+ | Gi1/0/16, Gi1/0/17, Gi1/0/18 | ||
+ | Gi1/0/19, Gi1/0/20, Gi1/0/21 | ||
+ | Gi1/0/22, Gi1/0/25, Gi1/0/26 | ||
+ | Gi1/0/27, Gi1/0/28 | ||
+ | 10 WI-FI active Gi1/0/8, Gi1/0/9 | ||
+ | 20 Visitantes active Gi1/0/6, Gi1/0/7 | ||
+ | 30 intra active Gi1/0/4, Gi1/0/5 | ||
+ | </syntaxhighlight> | ||
+ | |||
+ | > Interfaces do Switch do Galpão | ||
+ | |||
+ | <code> | ||
+ | interface GigabitEthernet1/0/1 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/2 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/3 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/4 | ||
+ | switchport access vlan 30 | ||
+ | switchport mode access | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/5 | ||
+ | switchport access vlan 30 | ||
+ | switchport mode access | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/6 | ||
+ | switchport access vlan 20 | ||
+ | switchport mode access | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/7 | ||
+ | switchport access vlan 20 | ||
+ | switchport mode access | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/8 | ||
+ | switchport access vlan 10 | ||
+ | switchport mode access | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/9 | ||
+ | switchport access vlan 10 | ||
+ | switchport mode access | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/10 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/11 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/12 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/13 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/14 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/15 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/16 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/17 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/18 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/19 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/20 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/21 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/22 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/23 | ||
+ | switchport trunk allowed vlan 10,20,30 | ||
+ | switchport mode trunk | ||
+ | channel-protocol lacp | ||
+ | channel-group 1 mode active | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/24 | ||
+ | switchport trunk allowed vlan 10,20,30 | ||
+ | switchport mode trunk | ||
+ | channel-protocol lacp | ||
+ | channel-group 1 mode active | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/25 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/26 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/27 | ||
+ | ! | ||
+ | interface GigabitEthernet1/0/28 | ||
+ | ! | ||
+ | </syntaxhighlight> | ||
+ | |||
+ | > Interface PO channel 1 do switch do Galpão | ||
+ | |||
+ | <code> | ||
+ | interface Port-channel1 | ||
+ | switchport trunk allowed vlan 10,20,30 | ||
+ | switchport mode trunk | ||
+ | </syntaxhighlight> | ||
+ | {{Collapse bottom}} |
Edição atual tal como às 12h01min de 22 de setembro de 2016
NOVO LINK: http://bit.ly/pji320162-config
Link da matéria: PJI11103-2016-2 (alternativo)
Desatualizado | ||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Operadora> Arquivo de configuração das interfaces de redes /etc/network/interfaces
|
interface Port-channel1 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk end </syntaxhighlight>
|
interface GigabitEthernet1/0/1 switchport access vlan 40 switchport mode access end Switch2#show running-config interface gigabitEthernet 1/0/2 Building configuration... Current configuration : 89 bytes |
interface GigabitEthernet1/0/2 switchport access vlan 30 switchport mode access end Switch2#show running-config interface gigabitEthernet 1/0/23 Building configuration... Current configuration : 134 bytes |
interface GigabitEthernet1/0/23 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk channel-group 1 mode active end Switch2#show running-config interface gigabitEthernet 1/0/24 Building configuration... Current configuration : 134 bytes |
interface GigabitEthernet1/0/24 switchport trunk allowed vlan 10,20,30,40 switchport mode trunk channel-group 1 mode active end </syntaxhighlight> > Interfaces de uso geral do Switch da Operadora As interfaces de 1/0/3 a 1/0/12 estão na VLAN 10 no modo access As interfaces de 1/0/13 a 1/0/22 estão na VLAN 20 no modo access
|
interface GigabitEthernet1/0/13 switchport access vlan 20 switchport mode access </syntaxhighlight> DHCP
|
interface GigabitEthernet1/0/2 |
interface GigabitEthernet1/0/3 |
interface GigabitEthernet1/0/4 switchport access vlan 30 switchport mode access |
interface GigabitEthernet1/0/5 switchport access vlan 30 switchport mode access |
interface GigabitEthernet1/0/6 switchport access vlan 20 switchport mode access |
interface GigabitEthernet1/0/7 switchport access vlan 20 switchport mode access |
interface GigabitEthernet1/0/8 switchport access vlan 10 switchport mode access |
interface GigabitEthernet1/0/9 switchport access vlan 10 switchport mode access |
interface GigabitEthernet1/0/10 |
interface GigabitEthernet1/0/11 |
interface GigabitEthernet1/0/12 |
interface GigabitEthernet1/0/13 |
interface GigabitEthernet1/0/14 |
interface GigabitEthernet1/0/15 |
interface GigabitEthernet1/0/16 |
interface GigabitEthernet1/0/17 |
interface GigabitEthernet1/0/18 |
interface GigabitEthernet1/0/19 |
interface GigabitEthernet1/0/20 |
interface GigabitEthernet1/0/21 |
interface GigabitEthernet1/0/22 |
interface GigabitEthernet1/0/23 switchport trunk allowed vlan 10,20,30 switchport mode trunk channel-protocol lacp channel-group 1 mode active |
interface GigabitEthernet1/0/24 switchport trunk allowed vlan 10,20,30 switchport mode trunk channel-protocol lacp channel-group 1 mode active |
interface GigabitEthernet1/0/25 |
interface GigabitEthernet1/0/26 |
interface GigabitEthernet1/0/27 |
interface GigabitEthernet1/0/28 |
</syntaxhighlight> > Interface PO channel 1 do switch do Galpão
|