Mudanças entre as edições de "Telecom20162 pji3 configuracoes"
(Criou página com ' Operadora ########## Arquivo de configuração das interfaces de redes /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopbac...') |
|||
Linha 1: | Linha 1: | ||
− | |||
Operadora | Operadora | ||
Edição das 19h25min de 15 de setembro de 2016
Operadora
- Arquivo de configuração das interfaces de redes
/etc/network/interfaces
- interfaces(5) file used by ifup(8) and ifdown(8)
auto lo iface lo inet loopback
- Onboard interface
auto eth0 iface eth0 inet manual
bond-master bond0 bond-use-carrier 1
- Offboard interface
auto eth1 iface eth1 inet manual
bond-master bond0 bond-use-carrier 1
- Bonding
auto bond0 iface bond0 inet manual
bond-slaves none bond-lacp-rate fast bond-mode 802.3ad bond-xmit_hash_policy layer2+3 bond-miimon 100
auto bond0.10 iface bond0.10 inet static address 192.168.10.10 netmask 255.255.255.0
auto bond0.20 iface bond0.20 inet static address 192.168.20.10 netmask 255.255.255.0
auto bond0.30 iface bond0.30 inet static address 200.135.37.125 netmask 255.255.255.192 gateway 200.135.37.126 dns-nameservers 8.8.8.8 8.8.4.4
auto bond0.40 iface bond0.40 inet static address 192.168.40.10 netmask 255.255.255.0
- Arquivo script de inicialização
/etc/rc.local
- !/bin/sh -e
- rc.local
- This script is executed at the end of each multiuser runlevel.
- Make sure that the script will "exit 0" on success or any other
- value on error.
- In order to enable or disable this script just change the execution
- bits.
- By default this script does nothing.
killall pppoe-server # Mata qualquer processo pppoe rodando pppoe-server -C pji -L 10.0.0.1 -p /etc/ppp/faixa-ip -I bond0.40 # Cria um novo processo pppoe sysctl -w net.ipv4.conf.all.forwarding=1 # Habilita o roteamento no servidor iptables -t nat -A POSTROUTING -o bond0.30 -j MASQUERADE # Configura o NAT
exit 0