|
|
(152 revisões intermediárias por 3 usuários não estão sendo mostradas) |
Linha 1: |
Linha 1: |
| = IF-SC Palhoça Bilíngue = | | = IF-SC Palhoça Bilíngue = |
| + | == Infraestrutura de Tecnologia da Informação e Comunicação (TIC) == |
| | | |
− | == Configuração do Servidor de Desenvolvimento == | + | === Diário de Bordo === |
| | | |
− | '''BIOS'''
| + | [[Diario_de_Bordo:Ronaldo_Cardozo_Lages | '''Relatos diários (ou quase)''']] das atividades realizadas na infraestrutura de TIC realizadas pelo estagiário '''Ronaldo Cardozo Lages''', em breve Técnico em Telecomunicações. |
− | * Ligar o servidor
| |
− | ** Pressionar '''botão preto''' acima da logomarca DELL (instalado na posição vertical)
| |
− | * Teclar '''F12''' durante a inicialização do hardware
| |
− | ** Aparece mensagem '''F12 Boot Options''' no canto superior direito da tela
| |
− | ** Mensagem muda para '''Preparing one-time boot menu...''' em verde
| |
− | * Tela Boot Device Menu é mostrada
| |
− | ** 1ª opção ( ) vem selecionada
| |
− | ** Mudar para 4ª opção: '''System Setup'''
| |
− | ** Teclar '''<ENTER>'''
| |
− | * Tela gráfica '''Dell Inc. OptiPlex 780''' mostrada (acompanhar menu à esquerda):
| |
− | ** '''Settings''' (1º nível)
| |
− | *** '''General''' (2º nível)
| |
− | **** [[Servidor_Desenvolvimento:Configuração_BIOS:System_Board|'''System Board''']] (3º nível)
| |
− | ***** Nada a fazer, apenas informações para conhecimento
| |
− | **** [[Servidor_Desenvolvimento:Configuração_BIOS:Date_Time|'''Date/Time''']] (3º nível)
| |
− | ***** Atualizar data e hora mudando os valores necessários (AM = antes meio-dia, PM = após meio-dia)
| |
− | **** [[Servidor_Desenvolvimento:Configuração_BIOS:Boot_Sequence|'''Boot Sequence''']] (3º nível)
| |
− | ***** Conferir marcação (coluna esquerda) e ordem (coluna direita) dos dispositivos
| |
− | *** '''Drives''' (2º nível)
| |
− | **** [[Servidor_Desenvolvimento:Configuração_BIOS:Diskette_Drive|'''Diskette Drive''']] (3º nível)
| |
− | ***** Conferir marcação pois dispositivo de disquete não será usado
| |
− | **** [[Servidor_Desenvolvimento:Configuração_BIOS:SATA_Operation|'''SATA Operation''']] (3º nível)
| |
− | ***** Conferir marcação pois dispositivo de disquete não será usado
| |
− | **** [[Servidor_Desenvolvimento:Configuração_BIOS:SMART_Operation|'''SMART Operation''']] (3º nível)
| |
− | ***** Conferir marcação pois usaremos SMART para monitorar o HD
| |
− | **** [[Servidor_Desenvolvimento:Configuração_BIOS:Drives|'''Drives''']] (3º nível)
| |
− | ***** Conferir marcação pois usaremos somente interfaces SATA-0 (HD) e SATA-1 (DVD)
| |
− | *** '''System Configuration''' (2º nível)
| |
− | **** [[Servidor_Desenvolvimento:Configuração_BIOS:Integrated_NIC|'''Integrated NIC''']] (3º nível)
| |
− | ***** Conferir marcação pois usaremos NIC sem PXE ou ImageServer
| |
− | **** [[Servidor_Desenvolvimento:Configuração_BIOS:USB_Controller|'''USB Controller''']] (3º nível)
| |
− | ***** Conferir marcação pois dispositivos USB serão permitidos
| |
− | **** [[Servidor_Desenvolvimento:Configuração_BIOS:Parallel_Port|'''Parallel Port''']] (3º nível)
| |
− | ***** Conferir marcação pois interface paralela não será usada
| |
| | | |
− | **** Mudar para item '''Parallel Port Address''' (3º nível)
| + | === Relatório de Avaliação da Infraestrutura de TIC === |
− | ***** Como não teremos interface paralela, então este opção não pode ser alterada
| |
| | | |
− | <code>
| + | Em 25/10/2010, segunda-feira, foi produzido e entregue ao Diretor do Campus, Prof. Vilmar Silva, ao Coordenador de TIC, Prof. Cláudio Ferretti e ao Monitor do Estágio Prof. Ederson Torresini, o documento, um relatório de 15 páginas em formato PDF que apresenta a situação original e aponta sugestões tanto imediatas quanto mais perenes. Esse documento foi elaborado por mim, Ronaldo Cardozo Lages, após análise e dabate da conjuntura de TIC com a orientação do Prof. Ederson Torresini, do IF-SC Campus São José. Tal documento poder ser baixado recém apresentado. |
− | . | |
− | (o) 378h
| |
− | ( ) 278h
| |
− | ( ) 3BCh
| |
| | | |
− | This field selects the base IO address for the integrated parallel port.
| + | Documentado em 28/11/2010 (domingo) por '''Ronaldo Cardozo Lages'''. |
− | </syntaxhighlight>
| |
| | | |
− | **** Mudar para item '''Serial Port #1''' (3º nível)
| + | === Configuração da Rede (situação original) === |
− | ***** Como não teremos interface serial, então este opção não pode ser alterada
| |
| | | |
− | <code>
| + | Documentado em 28/11/2010 (domingo) por '''Ronaldo Cardozo Lages'''. |
− | .
| |
− | (o) Disable
| |
− | ( ) AUTO
| |
− | ( ) COM1
| |
− | ( ) COM2
| |
| | | |
− | This option determines how the built-in serial port operates.
| + | === Configuração da Rede Sem-Fio (wireless) atualizada === |
| | | |
− | Disable = Port is disabled
| + | ==== Sala da Administração e Secretaria ==== |
− | Auto = BIOS selects between COM1 and COM3
| |
− | if both resources are in use, the port is disabled
| |
− | COM1 = Port is configurated at 3F8h with IRQ 4
| |
− | COM3 = Port is configurated at 3E8h with IRQ 4
| |
| | | |
− | Note: The operating system may allocate resources even though the setting is disabled.
| + | Em 22/11/2010 (segunda-feira) fizemos uma readequação na infraestrutura de rede da Sala da Administração e Secretaria visando '''eliminar o uso de criptografia WEP''' (protocolo altamente frágil para redes sem-fio) no roteador '''D-Link DI-524UP''' que atendia deficitariamente os usuários, visto ser um ativo de rede destinado ao uso doméstico. |
− | </syntaxhighlight>
| |
| | | |
− | **** Mudar para item '''Miscellaneous Devices''' (3º nível)
| + | Com essa mudança implantamos o uso do novo '''AP (access-point) D-Link DWL-3200AP''' com perfil profissional, '''desativando a função de AP''' do dispositivo '''DI-524UP'''. |
− | ***** Conferir marcação pois termos USB Quad e Dual, além de PCI e Audio
| |
| | | |
− | <code>
| + | Devido a necessidade de permanecer conectada a impressora através de sua '''interface de rede Ethernet''', então optamos por '''usar a função de roteador''' do '''DI-524UP''', além dele '''fazer a distribuição de números IPs (DHCP)''' para as estações de trabalho desta sala. |
− | . | |
− | [ ] Front USB [v] Rear Quad USB
| |
− | [v] Rear Dual USB [v] PCI Slots
| |
− | [v] Audio
| |
| | | |
− | These fields let you enable or disable various system devices.
| |
− | </syntaxhighlight>
| |
| | | |
− | *** Mudar para item '''Video''' (2º nível)
| + | Esse trabalho foi executado pelo bolsista após análise do problema, debate de alternativas e receber orientações minhas. |
− | **** Mudar para item '''Primary Video''' (3º nível)
| |
− | ***** Conferir marcação pois teremos placa gráfica PCI Express neste servidor
| |
| | | |
− | <code>
| + | Documentado em 28/11/2010 (domingo) por '''Ronaldo Cardozo Lages'''. |
− | .
| |
− | (o) Auto
| |
− | ( ) Onboard/Card
| |
| | | |
− | This field determines which video controller will become the primary video controller when 2
| + | ==== Sala dos Professores ==== |
− | controller are available in the system. This selection matters only if there are 2 video
| |
− | controllers present.
| |
| | | |
− | Auto = Use the add-in video controller
| + | Em 24/11/2010 (quarta-feira) implementamos na Sala dos Professores, a mesma readequação na infraestrutura de rede para também '''eliminar o uso de criptografia WEP''' no roteador '''D-Link WBR-1310''' que atendia deficitariamente os professores, visto também ser um ativo de rede destinado ao uso doméstico. |
− | Onboard/Card = Use the integrated video controller unless a Graphics card
| |
− | is installed. A PCI Express Graphics (PEG) card will override
| |
− | and disable the integrated video controller.
| |
− | </syntaxhighlight>
| |
| | | |
− | *** Mudar para item '''Performance''' (2º nível)
| + | Com essa mudança implantamos o uso do novo '''AP (access-point) D-Link DWL-3200AP''' com perfil profissional, '''desativando a função de AP''' do dispositivo '''WBR-1310'''. |
− | **** Mudar para item '''Multi Core Support''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos CPU multi core
| |
| | | |
− | <code>
| + | Visando manter uma sub-rede específica para esta sala, então optamos por '''usar a função de roteador''' do '''WBR-1310''', além dele '''fazer a distribuição de números IPs (DHCP)''' para as estações de trabalho desta sala. |
− | . | |
− | [v] Enable Multi Core Support
| |
| | | |
− | This field specifies whether the processor will have one or all cores enabled. The
| + | Esse trabalho foi executado pelo bolsista '''%%''' após análise do problema, debate de alternativas e receber orientações minhas. |
− | performance of some applications will improve with the additional cores.
| |
− | </syntaxhighlight>
| |
| | | |
− | **** Mudar para item '''Intel(R) SpeedStep(TM)''' (3º nível)
| + | Documentado em 28/11/2010 (domingo) por '''Ronaldo Cardozo Lages'''. |
− | ***** Conferir marcação pois usaremos esta facilidade da Intel(R)
| |
| | | |
− | <code>
| + | === Configuração do Servidor de Desenvolvimento === |
− | .
| |
− | [v] Enable Intel(R) SpeedStep(TM)
| |
| | | |
− | This option enables or disables the Intel(R) SpeedStep(TM) mode of the processor.
| + | ==== BIOS ==== |
− | When disabled, the system is placed into the highest performance state and the Intel(R)
| + | * Ligar [[Servidor_Desenvolvimento:Configuracao_BIOS:DELL_OptiPlex_780_Desenvolvimento|'''Servidor de Desenvolvimento DELL OptiPlex 780''']] da direita (gabinete na posição vertical) pressionando [[Servidor_Desenvolvimento:Configuracao_BIOS:DELL_OptiPlex_780_Desenvolvimento|'''botão preto''']] acima da logomarca prateada '''DELL'''. |
− | SpeedStep(TM) applet or native operating system driver are prevented from adjusting the
| + | * Tela de inicialização do sistema com mensagem [[Servidor_Desenvolvimento:Configuracao_BIOS:F12_Boot_Options|'''F12 Boot Options''']] no canto superior direito da tela. |
− | processor's performance. When enabled, the Intel(R) SpeedStep(TM)-enabled CPU is allowed to
| + | ** Teclar '''F12''' e mensagem mudará para [[Servidor_Desenvolvimento:Configuracao_BIOS:Preparing_one-time_boot_menu|'''Preparing one-time boot menu...''']] em verde (mesmo canto superior direito). |
− | operate in multiple performance states.
| + | * Tela [[Servidor_Desenvolvimento:Configuracao_BIOS:Boot_Device_Menu|'''Boot Device Menu''']] é mostrada com 1ª opção selecionada. |
− | </syntaxhighlight> | + | ** Mudar para [[Servidor_Desenvolvimento:Configuracao_BIOS:Boot_System_Setup|'''4ª opção: System Setup''']] e teclar '''<ENTER>'''. |
| + | * Tela gráfica [[Servidor_Desenvolvimento:Configuracao_BIOS:Dell_OptiPlex_780_foto|'''Dell Inc. OptiPlex 780''']] mostrada ([[Servidor_Desenvolvimento:Configuracao_BIOS:Dell_OptiPlex_780|'''clique AQUI''']] para acompanhar menu à esquerda passo-a-passo). |
| | | |
− | **** Mudar para item '''C States Control''' (3º nível)
| |
− | ***** Conferir marcação pois não usaremos esta função do processador
| |
| | | |
− | <code>
| + | Documentado em 23/11/2010 (sexta-feira) por '''Ronaldo Cardozo Lages'''. |
− | . | |
− | [ ] C States Control
| |
| | | |
− | This option enables or disables additional processor sleep states.
| + | ==== Sistema Operacional ==== |
− | The operating system may optionally use these for additional power savings when idle.
| + | * Usaremos o sistema operacional [http://www.debian.org/intro/about|'''Debian GNU/Linux'''][http://cdimage.debian.org/cdimage/weekly-builds/'''5.0.7 (Lenny Testing) amd64 (64 bits)'''] baixado do [http://debian.pop-sc.rnp.br/debian-cd/current/amd64/iso-cd/debian-507-amd64-CD-1.iso|'''repositório espelho no POP-SC da RNP.br (UFSC)''']. |
− | </syntaxhighlight>
| + | * Aberto o disposito de DVD-RW, [[Servidor_Desenvolvimento:Instalando_Sistema_Operacional:Inserir_CD_Debian_Lenny_(stable) | '''inserir o CD-ROM gravado com a imagem Debian 5.0.7 amd64 (atualizar foto)''']], então fechar a gaveta. |
| + | * Reiniciar o computador ([[Servidor_Desenvolvimento:Configuracao_BIOS:DELL_OptiPlex_780_Desenvolvimento |'''teclar CTRL+ALT+DEL''']] se já ligado ou [[Servidor_Desenvolvimento:Instalando_Sistema_Operacional:DELL_OptiPlex_780_Desenvolvimento | '''acionar botão de Ligar''']] se desligado) para inicializar o sistema a partir do dispositivo de DVD-RW, então [[Servidor_Desenvolvimento:Instalando_Sistema_Operacional:F12_Boot_Options | '''teclar F12 na carga básica da BIOS''']]. |
| | | |
− | **** Mudar para item '''Limit CPUID Value''' (3º nível)
| |
− | ***** Conferir marcação pois não usaremos esta limitação do processador
| |
| | | |
− | <code>
| + | Documentado em 24/11/2010 (sexta-feira) por '''Ronaldo Cardozo Lages'''. |
− | .
| |
− | [ ] Enable CPUID Limit
| |
− | | |
− | This field limits the maximum value the processor Standard CPUID Function will support.
| |
− | Some operating systems will not complete installation when the maximum CPUID Function
| |
− | supported is greater than 3.
| |
− | </syntaxhighlight>
| |
− | | |
− | *** Mudar para item '''Virtualization Support''' (2º nível)
| |
− | **** Mudar para item '''Virtualization''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos esta facilidade na virtualização
| |
− | | |
− | <code>
| |
− | .
| |
− | [v] Enable Intel(R) Virtualization Technology
| |
− | | |
− | This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional
| |
− | hardware capabilities provided by Intel(R) Virtualization Technology.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''VT for Direct I/O''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos esta facilidade na virtualização
| |
− | | |
− | <code>
| |
− | .
| |
− | [v] Enable Intel(R) VT for Direct I/O
| |
− | | |
− | This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional
| |
− | hardware capabilities provided by Intel(R) Virtualization Technology for Direct I/O.
| |
− | </syntaxhighlight>
| |
− | | |
− | *** Mudar para item '''Security''' (2º nível)
| |
− | **** Mudar para item '''Administrator Password''' (3º nível)
| |
− | ***** Digitar password mestre conforme frase "Gott ist ein Popstar"
| |
− | | |
− | <code>
| |
− | .
| |
− | Enter the old password: [_______________________________________________] Password Set
| |
− | Enter the new password: [_______________________________________________]
| |
− | Confirm new password: [_______________________________________________] [OK]
| |
− | | |
− | The Administrator password is used to prohibit an unauthorized user from changing any
| |
− | configuration settings. To remove this password, enter the blank password at the "New" and
| |
− | "Confirm" prompts above.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''System Password''' (3º nível)
| |
− | ***** Não digitar password pois não usaremos este nível de proteção da BIOS
| |
− | | |
− | <code>
| |
− | .
| |
− | Enter the old password: [___________________Not Set_____________________]
| |
− | Enter the new password: [___________________(blank)_____________________]
| |
− | Confirm new password: [___________________(blank)_____________________] [OK]
| |
− | | |
− | The System password is used to prohibit an unauthorized user from booting.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Password Changes''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este nível de proteção da BIOS
| |
− | | |
− | <code>
| |
− | .
| |
− | [v] Enable Password Changes
| |
− | | |
− | This field controls the interaction between the system password and the administrator
| |
− | password. If enabled, the system password may be modified or deleted without having
| |
− | knowledge of the administrator password. If disabled, a valid administrator password is
| |
− | required to modify or delete the system password.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''TPM Security''' (3º nível)
| |
− | ***** Facilidade não habilitada portanto não pode ser alterada
| |
− | | |
− | <code>
| |
− | .
| |
− | [ ] TPM Security
| |
− | (o) Deactivate
| |
− | ( ) Activate
| |
− | ( ) Clear
| |
− | | |
− | This option lets you control whether the Trusted Platform Module (TPM) in the system is
| |
− | enable or visible to the operation system. When disabled, the BIOS will not turn on the
| |
− | TPM during POST. The TPM will be non-functional and invisible to the operating system.
| |
− | When enabled, the BIOS will turn on the TPM during POST so that it can be used by the
| |
− | operating system.
| |
− |
| |
− | NOTE: Disabling this option does not change any settings you may have made to the TPM,
| |
− | nor does it delete or change any information or keys you may have stored there. It simply
| |
− | turns off the TPM so that it cannot be used. When you re-enable this option, the TPM will
| |
− | function exactly as it did before it was disable.
| |
− | | |
− | When the TPM is in the enabled state you have the ability to control whether the TPM is
| |
− | deactivated and disabled or acitivated and enabled. It also allows you to clear the ownership
| |
− | information in the TPM (if any). Physical presence is implied when you make a change to this
| |
− | option. When "Deactivate" the TPM will be deactivated and disabled. It will not execute any
| |
− | commands that use the resources of the TPM, nor wil it allow any access to stored owner
| |
− | information. When "Activate" the TPM will be enabled and activated. This is the normal
| |
− | operating state for the TPM when you want to use its complete array of capabilities. When
| |
− | "Clear" the BIOS clears the owner information stored in the TPM. Use this setting to restore
| |
− | the TPM to its default state if you lose of forget the owner authentication data.
| |
− | | |
− | NOTE: Activation, deactivation and clear options are not affected if you load the setup
| |
− | program's default values. Changes to this option take effect immediately.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''CPU XD Support''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este recurso de segurança
| |
− | | |
− | <code>
| |
− | .
| |
− | [v] Enable CPU XD Support
| |
− | | |
− | Execute-Disable Bit Capability
| |
− | | |
− | This option enables or disables the Execute Disable mode of the processor. The operating
| |
− | system can use this feature to hinder software that exploits buffer overflows.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Computrace(R)''' (3º nível)
| |
− | ***** Conferir marcação pois não usaremos este recurso de segurança
| |
− | | |
− | <code>
| |
− | .
| |
− | (o) Deactivate
| |
− | ( ) Disable
| |
− | ( ) Activate
| |
− | | |
− | This field lets you Activate or Disable the BIOS module interface of the optimal
| |
− | Computrace(R) Service from Absolute(R) Software.
| |
− | | |
− | The Computrace(R) agent from Absolute(R) Software is a service solution designed to help
| |
− | track assets and provide recovery services in the event the computer is lost or stolen. The
| |
− | Computrace(R) agent communicates with the Absolute(R) Software Monitoring Server at
| |
− | programmed intervals to provide the tracking service. By activating the service, you consent
| |
− | to the transmission of information from and to your computer and the Absolute(R) Software
| |
− | Monitoring Server. The Computrace(R) service is purchased as an option and the monitoring
| |
− | Server will enable its agent security module through an inteface provided by the BIOS.
| |
− | Computrace(R) and Absolute(R) are registred trademarks of Absolute(R) Software Corporation.
| |
− | | |
− | Deativate = The Computrace(R) module interface is not acitive.
| |
− | Disable = Permanently block the Computrace(R) module interface.
| |
− | Activate = Permit the Computrace(R) module interface.
| |
− | | |
− | The Absolute(R) Anti-Theft solution is presently Deactivated. Note that the Activate or Disable
| |
− | options will permanently Activate or Disable the feature and no further changes will be
| |
− | allowed.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Chassis Intrusion''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este recurso de segurança
| |
− | | |
− | <code>
| |
− | .
| |
− | [ ] Clear Intrusion Warning
| |
− | ( ) Disable
| |
− | (o) Enable
| |
− | ( ) On-Silent
| |
− | | |
− | This option controls the chassis intrusion feature.
| |
− | | |
− | Disable = Disable the intrusion detection feature
| |
− | Enable = Enable the intrusion detection feature and report intrusions during POST
| |
− | On-Silent = Enable the intrusion detection feature but do not display any
| |
− | detected intrusions during POST
| |
− | | |
− | A chassis intrusion has been detected. Select "Clear Intrusion Warning" to acknowledge and
| |
− | clear this event. The system will then be armed to look for future security breaches.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''SATA-0 Password''' (3º nível)
| |
− | ***** Não digitar password pois não usaremos este nível de proteção da BIOS
| |
− | | |
− | <code>
| |
− | .
| |
− | Enter the old password: [___________________Not Set_____________________]
| |
− | Enter the new password: [___________________(blank)_____________________]
| |
− | Confirm new password: [___________________(blank)_____________________] [OK]
| |
− | | |
− | The drive password is used to prohibit an unauthorized user from using your drive.
| |
− | </syntaxhighlight>
| |
− | | |
− | *** Mudar para item '''Power Management''' (3º nível)
| |
− | **** Mudar para item '''AC Recovery''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este recurso de gerenciamento de energia
| |
− | | |
− | <code>
| |
− | . | |
− | ( ) Power Off
| |
− | (o) Power On
| |
− | ( ) Last Power State
| |
− | | |
− | This field specifies how the system will behave when AC power is restored after an AC
| |
− | power loss.
| |
− |
| |
− | Power Off = System stays off after AC power is restored
| |
− | Power On = System powers on after AC power is restored
| |
− | Last Power State = System returns to the previous state after AC power recovery
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Auto On Time''' (3º nível)
| |
− | ***** Conferir marcação pois não usaremos ligamento automático
| |
− | | |
− | <code>
| |
− | .
| |
− | 12 : 00 AM
| |
− | HH MM A/P
| |
− | | |
− | (o) Disable
| |
− | ( ) Every Day
| |
− | ( ) Weekdays
| |
− | | |
− | This option sets the time of day you would like the system to turn on automatically.
| |
− |
| |
− | Disable = The system will not automatically turn on
| |
− | Every Day = The system will power on every day at the time specified above
| |
− | Weekdays = The system will power on Mondey through Friday at the time
| |
− | specified above
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Low Power Mode''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este recurso de gerenciamento de energia
| |
− | | |
− | <code>
| |
− | .
| |
− | [v] Enable Low Power Mode
| |
− | | |
− | This field determines how aggressive the system is at conserving power while shutdown or
| |
− | in Hibernate mode. When this option is enabled, more power is conserved.
| |
− | | |
− | Note: With this option enabled, the integrated NIC will be disabled when the system is
| |
− | shutdown or in Hibernate mode. Only add-in NIC cards will be able to remotely wake the
| |
− | system.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Remote Wake Up''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este recurso de ligamento remoto
| |
− | | |
− | <code>
| |
− | .
| |
− | ( ) Disable
| |
− | (o) Enable
| |
− | ( ) Enable with Boot to NIC
| |
− | | |
− | The system can be be powered up remotely from Suspend, Hibernate, of Off. When Low Power
| |
− | Mode (located in the Power Management group) is enabled, the system can only be powered
| |
− | up from Suspend mode. If Remote Wake Up from Hibernate of Off is also required, Low
| |
− | Power Mode must be disabled.
| |
− | | |
− | Disable = NIC cannot wake up the system
| |
− | Enable = NIC can wake up the system
| |
− | Enable with Boot to NIC = NIC can wake up the system, and teh system will boot
| |
− | from the network
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Suspend Mode''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este recurso de economia de energia
| |
− | | |
− | <code>
| |
− | .
| |
− | ( ) S3
| |
− | (o) S1
| |
− | | |
− | This field selects the power management suspend mode.
| |
− | | |
− | S3 = System conserves more power when not in use
| |
− | S1 = System resumes more quikly from sleep mode
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Fan Control Override''' (3º nível)
| |
− | ***** Conferir marcação pois não usaremos este controle de ventilador
| |
− | | |
− | <code>
| |
− | .
| |
− | [ ] Fan Control Override
| |
− | | |
− | This field determines the speed of the system fan.
| |
− | | |
− | When enabled, the system fan runs at full speed. WARNING: The system fan is very loud at
| |
− | full speed.
| |
− | When disabled, the fan controller uses system environment data to set the fan at its
| |
− | optimal speed.
| |
− | </syntaxhighlight>
| |
− | | |
− | *** Mudar para item '''Maintenance''' (2º nível)
| |
− | **** Mudar para item '''Service Tag''' (3º nível)
| |
− | ***** Conferir valor indicado mas não alterá-lo
| |
− | | |
− | <code>
| |
− | .
| |
− | [HXCKQN1]
| |
− | | |
− | This field display your system's Service Tag.
| |
− | If the Service Tag was not already set, you would be able to use this field to set it.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Asset Tag''' (3º nível)
| |
− | ***** Nada fazer, mesmo estando sem valor
| |
− | | |
− | <code>
| |
− | .
| |
− | [_______]
| |
− | | |
− | This field allows you to create a system Asset Tag. The field can only be updated is the Asset
| |
− | Tag is not already set.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''SERR Messages''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos permitiremos essas mensagens
| |
− | | |
− | <code>
| |
− | .
| |
− | [v] Enable SERR Messages
| |
− | | |
− | This field controls the SERR message mechanism. Some graphics cards require that the
| |
− | SERR message mechanism be disabled.
| |
− | </syntaxhighlight>
| |
− | | |
− | *** Mudar para item '''ImageServer''' (2º nível)
| |
− | **** Mudar para item '''Lookup Method''' (3º nível)
| |
− | ***** Não alterar as marcações pois ImageServer não será usado neste servidor
| |
− | | |
− | <code>
| |
− | .
| |
− | ( ) Static IP
| |
− | (o) DNS
| |
− | | |
− | This field specifies how the ImageServer software will lookup server addresses.
| |
− | | |
− | DNS = ImageServer software will obtain server IP addresses using the Domain Name
| |
− | System (DNS) protocol.
| |
− | Static IP = ImageServer software will use static server IP addresses.
| |
− | | |
− | The factory default setting is DNS.
| |
− | | |
− | Note: This field is only relevant when the "Integrated NIC" control in the "System
| |
− | Configuration" group is set to "Enable with ImageServer".
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''ImageServer IP''' (3º nível)
| |
− | ***** Não alterar os valores pois ImageServer não será usado neste servidor
| |
− | | |
− | <code>
| |
− | .
| |
− | [255] [255] [255] [255]
| |
− | | |
− | This field specifies the primary static IP address of the ImageServer with the client
| |
− | software communicates.
| |
− | | |
− | The factory default setting is 255.255.255.255.
| |
− | | |
− | Note: This field is only relevant when the "Integrated NIC" control in the "System
| |
− | Configuration" group is set to "Enable with ImageServer" and when "Lookup Method" is set to
| |
− | "Static IP".
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''ImageServer Port''' (3º nível)
| |
− | ***** Não alterar os valores pois ImageServer não será usado neste servidor
| |
− | | |
− | <code>
| |
− | .
| |
− | [06910]
| |
− | | |
− | This field specifies the primary IP port of the ImageServer with the client software
| |
− | communicates.
| |
− | | |
− | The factory default setting is 06910.
| |
− | | |
− | Note: This field is only relevant when the "Integrated NIC" control in the "System
| |
− | Configuration" group is set to "Enable with ImageServer".
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Client DHCP''' (3º nível)
| |
− | ***** Não alterar os valores pois ImageServer não será usado neste servidor
| |
− | | |
− | <code>
| |
− | .
| |
− | ( ) Static IP
| |
− | (o) DHCP
| |
− | | |
− | This field specifies how the client will obtain the IP address.
| |
− | | |
− | DHCP = Client will obtain IP address using the Dynamic Host Configuration
| |
− | Protocol (DHCP).
| |
− | Static IP = Client will use static IP addresses.
| |
− | | |
− | The factory default setting is DHCP.
| |
− | | |
− | Note: This field is only relevant when the "Integrated NIC" control in the "System
| |
− | Configuration" group is set to "Enable with ImageServer".
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Client IP''' (3º nível)
| |
− | ***** Não alterar os valores pois ImageServer não será usado neste servidor
| |
− | | |
− | <code>
| |
− | .
| |
− | [255] [255] [255] [255]
| |
− | | |
− | This field specifies the static IP address of the client.
| |
− | | |
− | The factory default setting is 255.255.255.255.
| |
− | | |
− | Note: This field is only relevant when the "Integrated NIC" control in the "System
| |
− | Configuration" group is set to "Enable with ImageServer" and when "Client DHCP" is set to
| |
− | "Static IP".
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Client SubnetMask''' (3º nível)
| |
− | ***** Não alterar os valores pois ImageServer não será usado neste servidor
| |
− | | |
− | <code>
| |
− | .
| |
− | [255] [255] [255] [255]
| |
− | | |
− | This field specifies the subnet mask of the client.
| |
− | | |
− | The factory default setting is 255.255.255.255.
| |
− | | |
− | Note: This field is only relevant when the "Integrated NIC" control in the "System
| |
− | Configuration" group is set to "Enable with ImageServer" and when "Client DHCP" is set to
| |
− | "Static IP".
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Client Gateway''' (3º nível)
| |
− | ***** Não alterar os valores pois ImageServer não será usado neste servidor
| |
− | | |
− | <code>
| |
− | .
| |
− | [255] [255] [255] [255]
| |
− | | |
− | This field specifies the gateway of the client.
| |
− | | |
− | The factory default setting is 255.255.255.255.
| |
− | | |
− | Note: This field is only relevant when the "Integrated NIC" control in the "System
| |
− | Configuration" group is set to "Enable with ImageServer" and when "Client DHCP" is set to
| |
− | "Static IP".
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Licence Status''' (3º nível)
| |
− | ***** Não alterar os valores pois ImageServer não será usado neste servidor
| |
− | | |
− | <code>
| |
− | .
| |
− | On-demand Desktop Streaming with EasyConnectTM Embedded Licence Status
| |
− | | |
− | No License
| |
− | </syntaxhighlight>
| |
− | | |
− | *** Mudar para item '''Post Behavior''' (2º nível)
| |
− | **** Mudar para item '''Fast Boot''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este recurso
| |
− | | |
− | <code>
| |
− | .
| |
− | [v] Enable Fast Boot
| |
− | | |
− | This option can speed up the boot process by bypassing some compatibility steps.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Numlock LED''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este recurso
| |
− | | |
− | <code>
| |
− | .
| |
− | [v] Enable Numlock LED
| |
− | | |
− | This option specifies whether the NumLock LED should be on when the system boots.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''POST Hotkeys''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este recurso
| |
− | | |
− | <code>
| |
− | .
| |
− | [v] Enable F12 = Boot Menu
| |
− | | |
− | These fields specifies whether the sign-on screen displays a message stating the keystroke
| |
− | sequence required to enter the Setup program or the QuickBoot feature.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''Keyboard Errors''' (3º nível)
| |
− | ***** Conferir marcação pois não usaremos este recurso
| |
− | | |
− | <code>
| |
− | .
| |
− | [ ] Enable Keyboard Error Detection
| |
− | | |
− | This field specifies whether keyboard related errors are reported when the system boots.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''MEBx Hotkey''' (3º nível)
| |
− | ***** Conferir marcação pois usaremos este recurso
| |
− | | |
− | <code>
| |
− | .
| |
− | [v] Enable MEBx Hotkey
| |
− | | |
− | This field specifies whether the sign-on sreen display a message stating the keystroke
| |
− | sequence required to enter the Manageability Engine BIOS Extensions (MEBx) Setup
| |
− | program.
| |
− | </syntaxhighlight>
| |
− | | |
− | **** Mudar para item '''OS Install''' (3º nível)
| |
− | ***** Conferir marcação pois não usaremos este recurso
| |
− | | |
− | <code>
| |
− | .
| |
− | [ ] OS Install
| |
− | | |
− | This field determines the maximum amount of system memory availeble to the operating
| |
− | system. Some operating systems will not complete installation with more than 2 GB of
| |
− | system memory. If enabled the maximum available memory is 256 MB.
| |
− | </syntaxhighlight>
| |
− | | |
− | *** Mudar para item '''System Logs''' (2º nível)
| |
− | **** Mudar para item '''BIOS Events''' (3º nível)
| |
− | ***** Tela de monitoramento para quando sistema estiver em funcionamento
| |
− | | |
− | <code>
| |
− | .
| |
− | [Clear Log] [Mark All Entries]
| |
− | | |
− | DATE TIME TYPE DATA
| |
− | ------------------------------------------------------------------------
| |
− | U 08/25/10 19:35:38 Log Area Cleared NONE
| |
− | U 11/19/10 17:31:08 Out Of Range Chassis Intrusion
| |
− | </syntaxhighlight>
| |