Mudanças entre as edições de "Usuário:RonaldoLages"

De MediaWiki do Campus São José
Ir para navegação Ir para pesquisar
 
(164 revisões intermediárias por 3 usuários não estão sendo mostradas)
Linha 1: Linha 1:
 
= IF-SC Palhoça Bilíngue =
 
= IF-SC Palhoça Bilíngue =
 +
== Infraestrutura de Tecnologia da Informação e Comunicação (TIC) ==
  
== Configuração do Servidor de Desenvolvimento ==
+
=== Diário de Bordo ===
  
'''BIOS'''
+
[[Diario_de_Bordo:Ronaldo_Cardozo_Lages | '''Relatos diários (ou quase)''']] das atividades realizadas na infraestrutura de TIC realizadas pelo estagiário '''Ronaldo Cardozo Lages''', em breve Técnico em Telecomunicações.
* Ligar o servidor
 
** Pressionar '''botão preto''' acima da logomarca DELL (instalado na posição vertical)
 
* Teclar '''F12''' durante a inicialização do hardware
 
** Aparece mensagem '''F12 Boot Options''' no canto superior direito da tela
 
** Mensagem muda para '''Preparing one-time boot menu...''' em verde
 
* Tela Boot Device Menu é mostrada
 
** 1ª opção (  ) vem selecionada
 
** Mudar para 4ª opção: '''System Setup'''
 
** Teclar '''<ENTER>'''
 
* Tela gráfica '''Dell Inc. OptiPlex 780''' mostrada
 
** Menu à esquerda com item '''Settings''' (1º nível) selecionado
 
*** Mudar para item '''General''' (2º nível)
 
**** Mudar para item [[Servidor_Desenvolvimento_-_Configuracao_BIOS_-_System_Board|'''System Board''']] (3º nível)
 
***** Nada a fazer, apenas informações para conhecimento
 
  
<code>
+
=== Relatório de Avaliação da Infraestrutura de TIC ===
.
 
                                      System Information
 
BIOS Version              = A04
 
Service Tag              = HXCKQN1
 
Express Service Code      = 39021806557
 
Asset Tag                = {none}
 
LOM MAC Adress            = 84-2B-2B-7A-F2-D4
 
Manufacture Date          = 08/25/2010
 
Ownership Date            = 11/12/2010
 
  
                                      Memory Information
+
Em 25/10/2010, segunda-feira, foi produzido e entregue ao Diretor do Campus, Prof. Vilmar Silva, ao Coordenador de TIC, Prof. Cláudio Ferretti e ao Monitor do Estágio Prof. Ederson Torresini, o documento, um relatório de 15 páginas em formato PDF que apresenta a situação original e aponta sugestões tanto imediatas quanto mais perenes. Esse documento foi elaborado por mim, Ronaldo Cardozo Lages, após análise e dabate da conjuntura de TIC com a orientação do Prof. Ederson Torresini, do IF-SC Campus São José. Tal documento poder ser baixado recém apresentado.
Memory Installed          = 4 GB
 
Memory Speed              = 1066 MHz
 
Number of Active Channels = Dual Symmetric
 
Memory Technology        = DDR3
 
DIMM_1 Size              = 2 GB
 
DIMM_3 Size              = *** DIMM slot empty ***
 
DIMM_2 Size              = 2 GB
 
DIMM_4 Size              = *** DIMM slot empty ***
 
  
                                      Processor Information
+
Documentado em 28/11/2010 (domingo) por '''Ronaldo Cardozo Lages'''.
Processor Type            = Intel(R) Core(TM)2 Duo CPU    E7500 @ 2.93GHz
 
Processor Speed          = 2.933 GHz
 
Processor Bus Speed      = 1.066 GHz
 
Processor L2 Cache        = 3 MB
 
Processor Id              = 1067A
 
Microcode Version        = A07
 
Muiti Core Capable        = Yes (Dual)
 
HT Capable                = No
 
64-bit Technology        = Yes (Intel EM64T)
 
  
                                        PCI Information
+
=== Configuração da Rede (situação original) ===
SLOT1                    = PCI Bridge
 
SLOT2                    = {Empty}
 
SLOT3                    = {Empty}
 
</syntaxhighlight>
 
  
**** Mudar para item '''Date/Time''' (3º nível)
+
Documentado em 28/11/2010 (domingo) por '''Ronaldo Cardozo Lages'''.
***** Atualizar data e hora mudando os valores necessários (AM = antes meio-dia, PM = após meio-dia)
 
  
<code>
+
=== Configuração da Rede Sem-Fio (wireless) atualizada ===
.
 
                        11 / 25 / 10                12 : 03 : 32  PM
 
                        MM  DD  AA                HH  MM  SS  A/P
 
  
This option controls the system date and time. Changes to the date and time take effect
+
==== Sala da Administração e Secretaria ====
immediately.
 
</syntaxhighlight>
 
  
**** Mudar para item '''Boot Sequence''' (3º nível)
+
Em 22/11/2010 (segunda-feira) fizemos uma readequação na infraestrutura de rede da Sala da Administração e Secretaria visando '''eliminar o uso de criptografia WEP''' (protocolo altamente frágil para redes sem-fio) no roteador '''D-Link DI-524UP''' que atendia deficitariamente os usuários, visto ser um ativo de rede destinado ao uso doméstico.
***** Conferir marcação (coluna esquerda) e ordem (coluna direita) dos dispositivos
 
<code>
 
.
 
[ ] Onboard or USB Floppy Drive                  [ATA0-WDC WDC2500AAJS-75M0A0]
 
[v] SATA0-WDC WD2500AAJS-75M0A0                  [Onboard or USB CD-ROM Drive]
 
[v] Onboard or USB CD-ROM Drive                  [  LSI MPI Boot Support    ]
 
[ ] Onboard Network Controller
 
[v] LSI MPI Boot Support
 
  
This list specifies the order that the BIOS searches devices when trying to find an operanting
+
Com essa mudança implantamos o uso do novo '''AP (access-point) D-Link DWL-3200AP''' com perfil profissional, '''desativando a função de AP''' do dispositivo '''DI-524UP'''.
system to boot. To change the boot select the device to be changed in the list on the
 
rigth hand side, then click UP/DN arrows, or press the PgUp/PgDn keys of SHIFT-UP/DN
 
arrow keys to change the boot order of the device. The boot devices can also be selected or
 
de-selected from list using the check boxes on the left hand side. The F7 hotkey will
 
toggle displaying of dormant boot entries. These are entries for devices that are not present
 
or not applicable in the current SATA mode. Also note that reloading defaults can be used to
 
remove these dormant boot entries.
 
</syntaxhighlight>
 
  
*** Mudar para '''Drives''' (2º nível)
+
Devido a necessidade de permanecer conectada a impressora através de sua '''interface de rede Ethernet''', então optamos por '''usar a função de roteador''' do '''DI-524UP''', além dele '''fazer a distribuição de números IPs (DHCP)''' para as estações de trabalho desta sala.
**** Mudar para item '''Diskette Drive''' (3º nível)
 
***** Conferir marcação pois dispositivo de disquete não será usado
 
<code>
 
.
 
(o) Disable
 
( ) Enable
 
  
This field determines how the BIOS configures floppy drives. Operating Systems with USB
 
support will recognize USB floppy drives regardless of ths setting.
 
  
Disable = All floppy drives are disabled
+
Esse trabalho foi executado pelo bolsista após análise do problema, debate de alternativas e receber orientações minhas.
Enable  = All floppy drives are enable
 
  
Note: The "USB Controller" setup option will affect floppy operation.
+
Documentado em 28/11/2010 (domingo) por '''Ronaldo Cardozo Lages'''.
</syntaxhighlight>
 
  
**** Mudar para item '''SATA Operation''' (3º nível)
+
==== Sala dos Professores ====
***** Conferir marcação pois dispositivo de disquete não será usado
 
<code>
 
.
 
(o) RAID Autodetect / AHCI
 
( ) RAID Autodetect / ATA
 
( ) RAID On
 
( ) Legacy
 
  
This field configures the operating mode of the integrated hard drive controller.
+
Em 24/11/2010 (quarta-feira) implementamos na Sala dos Professores, a mesma readequação na infraestrutura de rede para também '''eliminar o uso de criptografia WEP''' no roteador '''D-Link WBR-1310''' que atendia deficitariamente os professores, visto também ser um ativo de rede destinado ao uso doméstico.
  
RAID Autodetect / AHCI = RAID if signed drives, otherwise AHCI
+
Com essa mudança implantamos o uso do novo '''AP (access-point) D-Link DWL-3200AP''' com perfil profissional, '''desativando a função de AP''' do dispositivo '''WBR-1310'''.
RAID Autodetect / ATA  = RAID if signed drives, otherwise ATA
 
RAID On                = SATA is configured for RAID on every boot
 
Legacy                = The hard drive controller is configured for legacy mode
 
  
Note the legacy mode provides for compatibility with some older operating systems that do
+
Visando manter uma sub-rede específica para esta sala, então optamos por '''usar a função de roteador''' do '''WBR-1310''', além dele '''fazer a distribuição de números IPs (DHCP)''' para as estações de trabalho desta sala.
not support native resources assigned to the drive controller.
 
  
RAID mode is incompatible with ImageServer. Please disable RAID mode if enabling
+
Esse trabalho foi executado pelo bolsista '''%%''' após análise do problema, debate de alternativas e receber orientações minhas.
ImageServer.
 
</syntaxhighlight>
 
  
**** Mudar para item '''SMART Operation''' (3º nível)
+
Documentado em 28/11/2010 (domingo) por '''Ronaldo Cardozo Lages'''.
***** Conferir marcação pois usaremos SMART para monitorar o HD
 
<code>
 
.
 
[v] Enable Smart Reporting
 
  
This field controls whether hard drive errors for integrated drives are reported during system
+
=== Configuração do Servidor de Desenvolvimento ===
setup. This technology is part of the SMART (Self Monitoring Analysis and Reporting
 
Technology) specification.
 
</syntaxhighlight>
 
  
**** Mudar para item '''Drives''' (3º nível)
+
==== BIOS ====
***** Conferir marcação pois usaremos somente interfaces SATA-0 (HD) e SATA-1 (DVD)
+
* Ligar [[Servidor_Desenvolvimento:Configuracao_BIOS:DELL_OptiPlex_780_Desenvolvimento|'''Servidor de Desenvolvimento DELL OptiPlex 780''']] da direita (gabinete na posição vertical) pressionando [[Servidor_Desenvolvimento:Configuracao_BIOS:DELL_OptiPlex_780_Desenvolvimento|'''botão preto''']] acima da logomarca prateada '''DELL'''.
<code>
+
* Tela de inicialização do sistema com mensagem [[Servidor_Desenvolvimento:Configuracao_BIOS:F12_Boot_Options|'''F12 Boot Options''']] no canto superior direito da tela.
.
+
** Teclar '''F12''' e mensagem mudará para [[Servidor_Desenvolvimento:Configuracao_BIOS:Preparing_one-time_boot_menu|'''Preparing one-time boot menu...''']] em verde (mesmo canto superior direito).
[v] SATA-0                                      [v] SATA-1
+
* Tela [[Servidor_Desenvolvimento:Configuracao_BIOS:Boot_Device_Menu|'''Boot Device Menu''']] é mostrada com 1ª opção selecionada.
[ ] SATA-2                                      [ ] External SATA
+
** Mudar para [[Servidor_Desenvolvimento:Configuracao_BIOS:Boot_System_Setup|'''4ª opção: System Setup''']] e teclar '''<ENTER>'''.
 +
* Tela gráfica [[Servidor_Desenvolvimento:Configuracao_BIOS:Dell_OptiPlex_780_foto|'''Dell Inc. OptiPlex 780''']] mostrada ([[Servidor_Desenvolvimento:Configuracao_BIOS:Dell_OptiPlex_780|'''clique AQUI''']] para acompanhar menu à esquerda passo-a-passo).
  
These fields allow the user to enable or disable an ATA or SATA device (such as Hard Drive,
 
CD Drive, or DVD Drive).
 
  
                                (SATA-0)
+
Documentado em 23/11/2010 (sexta-feira) por '''Ronaldo Cardozo Lages'''.
Controller detais:
 
* Controller = Serial ATA
 
* Port      = SATA-0
 
Device details:
 
* Drive ID  = WDC WD2500AAJS-75M0A0
 
* Capacity  = 250GB
 
* BIOS      = This drive is controlled by the AHCI BIOS
 
  
                                (SATA-1)
+
==== Sistema Operacional ====
Controller detais:
+
* Usaremos o sistema operacional [http://www.debian.org/intro/about|'''Debian GNU/Linux'''][http://cdimage.debian.org/cdimage/weekly-builds/'''5.0.7 (Lenny Testing) amd64 (64 bits)'''] baixado do [http://debian.pop-sc.rnp.br/debian-cd/current/amd64/iso-cd/debian-507-amd64-CD-1.iso|'''repositório espelho no POP-SC da RNP.br (UFSC)'''].
* Controller = Serial ATA
+
* Aberto o disposito de DVD-RW, [[Servidor_Desenvolvimento:Instalando_Sistema_Operacional:Inserir_CD_Debian_Lenny_(stable) | '''inserir o CD-ROM gravado com a imagem Debian 5.0.7 amd64 (atualizar foto)''']], então fechar a gaveta.
* Port      = SATA-1
+
* Reiniciar o computador ([[Servidor_Desenvolvimento:Configuracao_BIOS:DELL_OptiPlex_780_Desenvolvimento |'''teclar CTRL+ALT+DEL''']] se já ligado ou [[Servidor_Desenvolvimento:Instalando_Sistema_Operacional:DELL_OptiPlex_780_Desenvolvimento | '''acionar botão de Ligar''']] se desligado) para inicializar o sistema a partir do dispositivo de DVD-RW, então [[Servidor_Desenvolvimento:Instalando_Sistema_Operacional:F12_Boot_Options | '''teclar F12 na carga básica da BIOS''']].
Device details:
 
* Drive ID  = TSSTcorp DVD+/-RW TS-H653G
 
  
                                (SATA-2)
 
Controller detais:
 
* Controller = Serial ATA
 
* Port      = SATA-2
 
  
                                (External SATA)
+
Documentado em 24/11/2010 (sexta-feira) por '''Ronaldo Cardozo Lages'''.
Controller detais:
 
* Controller = Serial ATA
 
* Port      = External SATA
 
</syntaxhighlight>
 
 
 
*** Mudar para '''System Configuration''' (2º nível)
 
**** Mudar para item '''Integrated NIC''' (3º nível)
 
***** Conferir marcação pois usaremos NIC sem PXE ou ImageServer
 
 
 
<code>
 
.
 
( ) Disable
 
(o) Enable
 
( ) Enable with PXE
 
( ) Enable with ImageServer
 
 
 
This field enables and disables the integrated Network Interface Controller (NIC).
 
 
 
Disable                = Integrated NIC disabled
 
Enable                  = Integrated NIC enabled
 
Enable with PXE        = Integrated NIC is on (with PXE enabled)
 
Enable with ImageServer = Integrated NIC is on (with ImageServer enabled)
 
 
 
Note: ImageServer is incompatible with RAID mode. Please disable RAID if enabling
 
ImageServer.
 
 
 
Note: PXE is needed only if intending to boot to an operating system located on a server, not
 
if you are booting to an OS located on a hard drive in this system.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''USB Controller''' (3º nível)
 
***** Conferir marcação pois dispositivos USB serão permitidos
 
 
 
<code>
 
.
 
( ) Disable
 
(o) Enable
 
( ) No Boot
 
 
 
This field enables and disables the integrated USB controller.
 
 
 
Disable  = The USB controller is disabled
 
Enable  = The USB controller is enabled
 
No Boot  = The USB controller is enabled; however, the BIOS will not
 
            recognize USB storage devices
 
 
 
Note: Operating systems with USB support will recognize USB storage devices regardless of
 
the "No Boot" setting.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Parallel Port''' (3º nível)
 
***** Conferir marcação pois interface paralela não será usada
 
 
 
<code>
 
.
 
(o) Disable                    ( ) ECP No DMA
 
( ) AT                          ( ) ECP DMA 1
 
( ) PS/2                        ( ) ECP DMA 3
 
( ) EPP
 
 
 
This option determines how the built-in parallel port operates.
 
 
 
Disable    = Port is disabled
 
AT        = Port is configured for IBM AT compatibility
 
PS/2      = Port is configured for IBM PS/2 compatibility
 
EPP        = Enhanced Parallel Port protocol
 
EPP No DMA = Extended Capability Port protocol with no DMA
 
EPP DMA 1  = Extended Capability Port protocol with DMA 1
 
EPP DMA 3  = Extended Capability Port protocol with DMA 3
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Parallel Port Address''' (3º nível)
 
***** Como não teremos interface paralela, então este opção não pode ser alterada
 
 
 
<code>
 
.
 
(o) 378h
 
( ) 278h
 
( ) 3BCh
 
 
 
This field selects the base IO address for the integrated parallel port.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Serial Port #1''' (3º nível)
 
***** Como não teremos interface serial, então este opção não pode ser alterada
 
 
 
<code>
 
.
 
(o) Disable
 
( ) AUTO
 
( ) COM1
 
( ) COM2
 
 
 
This option determines how the built-in serial port operates.
 
 
 
Disable    = Port is disabled
 
Auto      = BIOS selects between COM1 and COM3
 
              if both resources are in use, the port is disabled
 
COM1      = Port is configurated at 3F8h with IRQ 4
 
COM3      = Port is configurated at 3E8h with IRQ 4
 
 
 
Note: The operating system may allocate resources even though the setting is disabled.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Miscellaneous Devices''' (3º nível)
 
***** Conferir marcação pois termos USB Quad e Dual, além de PCI e Audio
 
 
 
<code>
 
.
 
[ ] Front USB                                  [v] Rear Quad USB
 
[v] Rear Dual USB                              [v] PCI Slots
 
[v] Audio
 
 
 
These fields let you enable or disable various system devices.
 
</syntaxhighlight>
 
 
 
*** Mudar para item '''Video''' (2º nível)
 
**** Mudar para item '''Primary Video''' (3º nível)
 
***** Conferir marcação pois teremos placa gráfica PCI Express neste servidor
 
 
 
<code>
 
.
 
(o) Auto
 
( ) Onboard/Card
 
 
 
This field determines which video controller will become the primary video controller when 2
 
controller are available in the system. This selection matters only if there are 2 video
 
controllers present.
 
 
 
Auto        = Use the add-in video controller
 
Onboard/Card = Use the integrated video controller unless a Graphics card
 
                is installed. A PCI Express Graphics (PEG) card will override
 
                and disable the integrated video controller.
 
</syntaxhighlight>
 
 
 
*** Mudar para item '''Performance''' (2º nível)
 
**** Mudar para item '''Multi Core Support''' (3º nível)
 
***** Conferir marcação pois usaremos CPU multi core
 
 
 
<code>
 
.
 
[v] Enable Multi Core Support
 
 
 
This field specifies whether the processor will have one or all cores enabled. The
 
performance of some applications will improve with the additional cores.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Intel(R) SpeedStep(TM)''' (3º nível)
 
***** Conferir marcação pois usaremos esta facilidade da Intel(R)
 
 
 
<code>
 
.
 
[v] Enable Intel(R) SpeedStep(TM)
 
 
 
This option enables or disables the Intel(R) SpeedStep(TM) mode of the processor.
 
When disabled, the system is placed into the highest performance state and the Intel(R)
 
SpeedStep(TM) applet or native operating system driver are prevented from adjusting the
 
processor's performance. When enabled, the Intel(R) SpeedStep(TM)-enabled CPU is allowed to
 
operate in multiple performance states.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''C States Control''' (3º nível)
 
***** Conferir marcação pois não usaremos esta função do processador
 
 
 
<code>
 
.
 
[ ] C States Control
 
 
 
This option enables or disables additional processor sleep states.
 
The operating system may optionally use these for additional power savings when idle.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Limit CPUID Value''' (3º nível)
 
***** Conferir marcação pois não usaremos esta limitação do processador
 
 
 
<code>
 
.
 
[ ] Enable CPUID Limit
 
 
 
This field limits the maximum value the processor Standard CPUID Function will support.
 
Some operating systems will not complete installation when the maximum CPUID Function
 
supported is greater than 3.
 
</syntaxhighlight>
 
 
 
*** Mudar para item '''Virtualization Support''' (2º nível)
 
**** Mudar para item '''Virtualization''' (3º nível)
 
***** Conferir marcação pois usaremos esta facilidade na virtualização
 
 
 
<code>
 
.
 
[v] Enable Intel(R) Virtualization Technology
 
 
 
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional
 
hardware capabilities provided by Intel(R) Virtualization Technology.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''VT for Direct I/O''' (3º nível)
 
***** Conferir marcação pois usaremos esta facilidade na virtualização
 
 
 
<code>
 
.
 
[v] Enable Intel(R) VT for Direct I/O
 
 
 
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional
 
hardware capabilities provided by Intel(R) Virtualization Technology for Direct I/O.
 
</syntaxhighlight>
 
 
 
*** Mudar para item '''Security''' (2º nível)
 
**** Mudar para item '''Administrator Password''' (3º nível)
 
***** Digitar password mestre conforme frase "Gott ist ein Popstar" 
 
 
 
<code>
 
.
 
Enter the old password: [_______________________________________________]  Password Set
 
Enter the new password: [_______________________________________________]
 
  Confirm new password: [_______________________________________________]  [OK]
 
 
 
The Administrator password is used to prohibit an unauthorized user from changing any
 
configuration settings. To remove this password, enter the blank password at the "New" and
 
"Confirm" prompts above.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''System Password''' (3º nível)
 
***** Não digitar password pois não usaremos este nível de proteção da BIOS 
 
 
 
<code>
 
.
 
Enter the old password: [___________________Not Set_____________________] 
 
Enter the new password: [___________________(blank)_____________________]
 
  Confirm new password: [___________________(blank)_____________________]  [OK]
 
 
 
The System password is used to prohibit an unauthorized user from booting.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Password Changes''' (3º nível)
 
***** Conferir marcação pois usaremos este nível de proteção da BIOS 
 
 
 
<code>
 
.
 
[v] Enable Password Changes
 
 
 
This field controls the interaction between the system password and the administrator
 
password. If enabled, the system password may be modified or deleted without having
 
knowledge of the administrator password. If disabled, a valid administrator password is
 
required to modify or delete the system password.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''TPM Security''' (3º nível)
 
***** Facilidade não habilitada portanto não pode ser alterada 
 
 
 
<code>
 
.
 
[ ] TPM Security
 
(o) Deactivate
 
( ) Activate
 
( ) Clear
 
 
 
This option lets you control whether the Trusted Platform Module (TPM) in the system is
 
enable or visible to the operation system. When disabled, the BIOS will not turn on the
 
TPM during POST. The TPM will be non-functional and invisible to the operating system.
 
When enabled, the BIOS will turn on the TPM  during POST so that it can be used by the
 
operating system.
 
 
NOTE: Disabling this option does not change any settings you may have made to the TPM,
 
nor does it delete or change any information or keys you may have stored there. It simply
 
turns off the TPM so that it cannot be used. When you re-enable this option, the TPM will
 
function exactly as it did before it was disable.
 
 
 
When the TPM is in the enabled state you have the ability to control whether the TPM is
 
deactivated and disabled or acitivated and enabled. It also allows you to clear the ownership
 
information in the TPM (if any). Physical presence is implied when you make a change to this
 
option. When "Deactivate" the TPM will be deactivated and disabled. It will not execute any
 
commands that use the resources of the TPM, nor wil it allow any access to stored owner
 
information. When "Activate" the TPM will be enabled and activated. This is the normal
 
operating state for the TPM when you want to use its complete array of capabilities. When
 
"Clear" the BIOS clears the owner information stored in the TPM. Use this setting to restore
 
the TPM to its default state if you lose of forget the owner authentication data.
 
 
 
NOTE: Activation, deactivation and clear options are not affected if you load the setup
 
program's default values. Changes to this option take effect immediately.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''CPU XD Support''' (3º nível)
 
***** Conferir marcação pois usaremos este recurso de segurança
 
 
 
<code>
 
.
 
[v] Enable CPU XD Support
 
 
 
Execute-Disable Bit Capability
 
 
 
This option enables or disables the Execute Disable mode of the processor. The operating
 
system can use this feature to hinder software that exploits buffer overflows.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Computrace(R)''' (3º nível)
 
***** Conferir marcação pois não usaremos este recurso de segurança
 
 
 
<code>
 
.
 
(o) Deactivate
 
( ) Disable
 
( ) Activate
 
 
 
This field lets you Activate or Disable the BIOS module interface of the optimal
 
Computrace(R) Service from Absolute(R) Software.
 
 
 
The Computrace(R) agent from Absolute(R) Software is a service solution designed to help
 
track assets and provide recovery services in the event the computer is lost or stolen. The
 
Computrace(R) agent communicates with the Absolute(R) Software Monitoring Server at
 
programmed intervals to provide the tracking service. By activating the service, you consent
 
to the transmission of information from and to your computer and the Absolute(R) Software
 
Monitoring Server. The Computrace(R) service is purchased as an option and the monitoring
 
Server will enable its agent security module through an inteface provided by the BIOS.
 
Computrace(R) and Absolute(R) are registred trademarks of Absolute(R) Software Corporation.
 
 
 
Deativate  = The Computrace(R) module interface is not acitive.
 
Disable    = Permanently block the Computrace(R) module interface.
 
Activate  = Permit the Computrace(R) module interface.
 
 
 
The Absolute(R) Anti-Theft solution is presently Deactivated. Note that the Activate or Disable
 
options will permanently Activate or Disable the feature and no further changes will be
 
allowed.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Chassis Intrusion''' (3º nível)
 
***** Conferir marcação pois usaremos este recurso de segurança
 
 
 
<code>
 
.
 
[ ] Clear Intrusion Warning
 
( ) Disable
 
(o) Enable
 
( ) On-Silent
 
 
 
This option controls the chassis intrusion feature.
 
 
 
Disable  = Disable the intrusion detection feature
 
Enable    = Enable the intrusion detection feature and report intrusions during POST
 
On-Silent = Enable the intrusion detection feature but do not display any
 
            detected intrusions during POST
 
 
 
A chassis intrusion has been detected. Select "Clear Intrusion Warning" to acknowledge and
 
clear this event. The system will then be armed to look for future security breaches.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''SATA-0 Password''' (3º nível)
 
***** Não digitar password pois não usaremos este nível de proteção da BIOS 
 
 
 
<code>
 
.
 
Enter the old password: [___________________Not Set_____________________] 
 
Enter the new password: [___________________(blank)_____________________]
 
  Confirm new password: [___________________(blank)_____________________]  [OK]
 
 
 
The drive password is used to prohibit an unauthorized user from using your drive.
 
</syntaxhighlight>
 
 
 
*** Mudar para item '''Power Management''' (3º nível)
 
**** Mudar para item '''AC Recovery''' (3º nível)
 
***** Conferir marcação pois usaremos este recurso de gerenciamento de energia
 
 
 
<code>
 
.
 
( ) Power Off
 
(o) Power On
 
( ) Last Power State
 
 
 
This field specifies how the system will behave when AC power is restored after an AC
 
power loss.
 
 
Power Off        = System stays off after AC power is restored
 
Power On        = System powers on after AC power is restored
 
Last Power State = System returns to the previous state after AC power recovery
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Auto On Time''' (3º nível)
 
***** Conferir marcação pois não usaremos ligamento automático
 
 
 
<code>
 
.
 
                                  12 : 00  AM
 
                                  HH  MM  A/P
 
 
 
                                  (o) Disable
 
                                  ( ) Every Day
 
                                  ( ) Weekdays
 
 
 
This option sets the time of day you would like the system to turn on automatically.
 
 
Disable  = The system will not automatically turn on
 
Every Day = The system will power on every day at the time specified above
 
Weekdays  = The system will power on Mondey through Friday at the time
 
            specified above
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Low Power Mode''' (3º nível)
 
***** Conferir marcação pois usaremos este recurso de gerenciamento de energia
 
 
 
<code>
 
.
 
[v] Enable Low Power Mode
 
 
 
This field determines how aggressive the system is at conserving power while shutdown or
 
in Hibernate mode. When this option is enabled, more power is conserved.
 
 
 
Note: With this option enabled, the integrated NIC will be disabled when the system is
 
shutdown or in Hibernate mode. Only add-in NIC cards will be able to remotely wake the
 
system.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Remote Wake Up''' (3º nível)
 
***** Conferir marcação pois usaremos este recurso de ligamento remoto
 
 
 
<code>
 
.
 
( ) Disable
 
(o) Enable
 
( ) Enable with Boot to NIC
 
 
 
The system can be be powered up remotely from Suspend, Hibernate, of Off. When Low Power
 
Mode (located in the Power Management group) is enabled, the system can only be powered
 
up from Suspend mode. If Remote Wake Up from Hibernate of Off is also required, Low
 
Power Mode must be disabled.
 
 
 
Disable                = NIC cannot wake up the system
 
Enable                  = NIC can wake up the system
 
Enable with Boot to NIC = NIC can wake up the system, and teh system will boot
 
                          from the network
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Suspend Mode''' (3º nível)
 
***** Conferir marcação pois usaremos este recurso de economia de energia
 
 
 
<code>
 
.
 
( ) S3
 
(o) S1
 
 
 
This field selects the power management suspend mode.
 
 
 
S3 = System conserves more power when not in use
 
S1 = System resumes more quikly from sleep mode
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Fan Control Override''' (3º nível)
 
***** Conferir marcação pois não usaremos este controle de ventilador
 
 
 
<code>
 
.
 
[ ] Fan Control Override
 
 
 
This field determines the speed of the system fan.
 
 
 
When enabled, the system fan runs at full speed. WARNING: The system fan is very loud at
 
full speed.
 
When disabled, the fan controller uses system environment data to set the fan at its
 
optimal speed.
 
</syntaxhighlight>
 
 
 
*** Mudar para item '''Maintenance''' (2º nível)
 
**** Mudar para item '''Service Tag''' (3º nível)
 
***** Conferir valor indicado mas não alterá-lo
 
 
 
<code>
 
.
 
                                          [HXCKQN1]
 
 
 
This field display your system's Service Tag.
 
If the Service Tag was not already set, you would be able to use this field to set it.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Asset Tag''' (3º nível)
 
***** Nada fazer, mesmo estando sem valor
 
 
 
<code>
 
.
 
                                          [_______]
 
 
 
This field allows you to create a system Asset Tag. The field can only be updated is the Asset
 
Tag is not already set.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''SERR Messages''' (3º nível)
 
***** Conferir marcação pois usaremos permitiremos essas mensagens
 
 
 
<code>
 
.
 
[v] Enable SERR Messages
 
 
 
This field controls the SERR message mechanism. Some graphics cards require that the
 
SERR message mechanism be disabled.
 
</syntaxhighlight>
 
 
 
*** Mudar para item '''ImageServer''' (2º nível)
 
**** Mudar para item '''Lookup Method''' (3º nível)
 
***** Não alterar as marcações pois ImageServer não será usado neste servidor
 
 
 
<code>
 
.  
 
( ) Static IP
 
(o) DNS
 
 
 
This field specifies how the ImageServer software will lookup server addresses.
 
 
 
DNS      = ImageServer software will obtain server IP addresses using the Domain Name
 
            System (DNS) protocol.
 
Static IP = ImageServer software will use static server IP addresses.
 
 
 
The factory default setting is DNS.
 
 
 
Note: This field is only relevant when the "Integrated NIC" control in the "System
 
Configuration" group is set to "Enable with ImageServer".
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''ImageServer IP''' (3º nível)
 
***** Não alterar os valores pois ImageServer não será usado neste servidor
 
 
 
<code>
 
.
 
[255] [255] [255] [255]
 
 
 
This field specifies the primary static IP address of the ImageServer with the client
 
software communicates.
 
 
 
The factory default setting is 255.255.255.255.
 
 
 
Note: This field is only relevant when the "Integrated NIC" control in the "System
 
Configuration" group is set to "Enable with ImageServer" and when "Lookup Method" is set to
 
"Static IP".
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''ImageServer Port''' (3º nível)
 
***** Não alterar os valores pois ImageServer não será usado neste servidor
 
 
 
<code>
 
.
 
                                              [06910]
 
 
 
This field specifies the primary IP port of the ImageServer with the client software
 
communicates.
 
 
 
The factory default setting is 06910.
 
 
 
Note: This field is only relevant when the "Integrated NIC" control in the "System
 
Configuration" group is set to "Enable with ImageServer".
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Client DHCP''' (3º nível)
 
***** Não alterar os valores pois ImageServer não será usado neste servidor
 
 
 
<code>
 
.
 
( ) Static IP
 
(o) DHCP
 
 
 
This field specifies how the client will obtain the IP address.
 
 
 
DHCP      = Client will obtain IP address using the Dynamic Host Configuration
 
            Protocol (DHCP).
 
Static IP = Client will use static IP addresses.
 
 
 
The factory default setting is DHCP.
 
 
 
Note: This field is only relevant when the "Integrated NIC" control in the "System
 
Configuration" group is set to "Enable with ImageServer".
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Client IP''' (3º nível)
 
***** Não alterar os valores pois ImageServer não será usado neste servidor
 
 
 
<code>
 
.
 
[255] [255] [255] [255]
 
 
 
This field specifies the static IP address of the client.
 
 
 
The factory default setting is 255.255.255.255.
 
 
 
Note: This field is only relevant when the "Integrated NIC" control in the "System
 
Configuration" group is set to "Enable with ImageServer" and when "Client DHCP" is set to
 
"Static IP".
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Client SubnetMask''' (3º nível)
 
***** Não alterar os valores pois ImageServer não será usado neste servidor
 
 
 
<code>
 
.
 
[255] [255] [255] [255]
 
 
 
This field specifies the subnet mask of the client.
 
 
 
The factory default setting is 255.255.255.255.
 
 
 
Note: This field is only relevant when the "Integrated NIC" control in the "System
 
Configuration" group is set to "Enable with ImageServer" and when "Client DHCP" is set to
 
"Static IP".
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Client Gateway''' (3º nível)
 
***** Não alterar os valores pois ImageServer não será usado neste servidor
 
 
 
<code>
 
.
 
[255] [255] [255] [255]
 
 
 
This field specifies the gateway of the client.
 
 
 
The factory default setting is 255.255.255.255.
 
 
 
Note: This field is only relevant when the "Integrated NIC" control in the "System
 
Configuration" group is set to "Enable with ImageServer" and when "Client DHCP" is set to
 
"Static IP".
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Licence Status''' (3º nível)
 
***** Não alterar os valores pois ImageServer não será usado neste servidor
 
 
 
<code>
 
.
 
On-demand Desktop Streaming with EasyConnectTM Embedded Licence Status
 
 
 
No License
 
</syntaxhighlight>
 
 
 
*** Mudar para item '''Post Behavior''' (2º nível)
 
**** Mudar para item '''Fast Boot''' (3º nível)
 
***** Conferir marcação pois usaremos este recurso
 
 
 
<code>
 
.
 
[v] Enable Fast Boot
 
 
 
This option can speed up the boot process by bypassing some compatibility steps.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Numlock LED''' (3º nível)
 
***** Conferir marcação pois usaremos este recurso
 
 
 
<code>
 
.
 
[v] Enable Numlock LED
 
 
 
This option specifies whether the NumLock LED should be on when the system boots.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''POST Hotkeys''' (3º nível)
 
***** Conferir marcação pois usaremos este recurso
 
 
 
<code>
 
.
 
[v] Enable F12 = Boot Menu
 
 
 
These fields specifies whether the sign-on screen displays a message stating the keystroke
 
sequence required to enter the Setup program or the QuickBoot feature.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''Keyboard Errors''' (3º nível)
 
***** Conferir marcação pois não usaremos este recurso
 
 
 
<code>
 
.
 
[ ] Enable Keyboard Error Detection
 
 
 
This field specifies whether keyboard related errors are reported when the system boots.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''MEBx Hotkey''' (3º nível)
 
***** Conferir marcação pois usaremos este recurso
 
 
 
<code>
 
.
 
[v] Enable MEBx Hotkey
 
 
 
This field specifies whether the sign-on sreen display a message stating the keystroke
 
sequence required to enter the Manageability Engine BIOS Extensions (MEBx) Setup
 
program.
 
</syntaxhighlight>
 
 
 
**** Mudar para item '''OS Install''' (3º nível)
 
***** Conferir marcação pois não usaremos este recurso
 
 
 
<code>
 
.
 
[ ] OS Install
 
 
 
This field determines the maximum amount of system memory availeble to the operating
 
system. Some operating systems will not complete installation with more than 2 GB of
 
system memory. If enabled the maximum available memory is 256 MB.
 
</syntaxhighlight>
 
 
 
*** Mudar para item '''System Logs''' (2º nível)
 
**** Mudar para item '''BIOS Events''' (3º nível)
 
***** Tela de monitoramento para quando sistema estiver em funcionamento
 
 
 
<code>
 
.
 
[Clear Log]      [Mark All Entries]
 
 
 
  DATE      TIME      TYPE                          DATA
 
------------------------------------------------------------------------
 
U 08/25/10  19:35:38  Log Area Cleared              NONE
 
U 11/19/10  17:31:08  Out Of Range                  Chassis Intrusion
 
</syntaxhighlight>
 

Edição atual tal como às 16h05min de 26 de janeiro de 2011

IF-SC Palhoça Bilíngue

Infraestrutura de Tecnologia da Informação e Comunicação (TIC)

Diário de Bordo

Relatos diários (ou quase) das atividades realizadas na infraestrutura de TIC realizadas pelo estagiário Ronaldo Cardozo Lages, em breve Técnico em Telecomunicações.

Relatório de Avaliação da Infraestrutura de TIC

Em 25/10/2010, segunda-feira, foi produzido e entregue ao Diretor do Campus, Prof. Vilmar Silva, ao Coordenador de TIC, Prof. Cláudio Ferretti e ao Monitor do Estágio Prof. Ederson Torresini, o documento, um relatório de 15 páginas em formato PDF que apresenta a situação original e aponta sugestões tanto imediatas quanto mais perenes. Esse documento foi elaborado por mim, Ronaldo Cardozo Lages, após análise e dabate da conjuntura de TIC com a orientação do Prof. Ederson Torresini, do IF-SC Campus São José. Tal documento poder ser baixado recém apresentado.

Documentado em 28/11/2010 (domingo) por Ronaldo Cardozo Lages.

Configuração da Rede (situação original)

Documentado em 28/11/2010 (domingo) por Ronaldo Cardozo Lages.

Configuração da Rede Sem-Fio (wireless) atualizada

Sala da Administração e Secretaria

Em 22/11/2010 (segunda-feira) fizemos uma readequação na infraestrutura de rede da Sala da Administração e Secretaria visando eliminar o uso de criptografia WEP (protocolo altamente frágil para redes sem-fio) no roteador D-Link DI-524UP que atendia deficitariamente os usuários, visto ser um ativo de rede destinado ao uso doméstico.

Com essa mudança implantamos o uso do novo AP (access-point) D-Link DWL-3200AP com perfil profissional, desativando a função de AP do dispositivo DI-524UP.

Devido a necessidade de permanecer conectada a impressora através de sua interface de rede Ethernet, então optamos por usar a função de roteador do DI-524UP, além dele fazer a distribuição de números IPs (DHCP) para as estações de trabalho desta sala.


Esse trabalho foi executado pelo bolsista após análise do problema, debate de alternativas e receber orientações minhas.

Documentado em 28/11/2010 (domingo) por Ronaldo Cardozo Lages.

Sala dos Professores

Em 24/11/2010 (quarta-feira) implementamos na Sala dos Professores, a mesma readequação na infraestrutura de rede para também eliminar o uso de criptografia WEP no roteador D-Link WBR-1310 que atendia deficitariamente os professores, visto também ser um ativo de rede destinado ao uso doméstico.

Com essa mudança implantamos o uso do novo AP (access-point) D-Link DWL-3200AP com perfil profissional, desativando a função de AP do dispositivo WBR-1310.

Visando manter uma sub-rede específica para esta sala, então optamos por usar a função de roteador do WBR-1310, além dele fazer a distribuição de números IPs (DHCP) para as estações de trabalho desta sala.

Esse trabalho foi executado pelo bolsista %% após análise do problema, debate de alternativas e receber orientações minhas.

Documentado em 28/11/2010 (domingo) por Ronaldo Cardozo Lages.

Configuração do Servidor de Desenvolvimento

BIOS


Documentado em 23/11/2010 (sexta-feira) por Ronaldo Cardozo Lages.

Sistema Operacional


Documentado em 24/11/2010 (sexta-feira) por Ronaldo Cardozo Lages.