Usuário:RonaldoLages

IF-SC Palhoça Bilíngue

Configuração do Servidor de Desenvolvimento

BIOS

• Ligar o servidor
  • Pressionar botão preto acima da logomarca DELL (instalado na posição vertical)
• Teclar F12 durante a inicialização do hardware
  • Aparece mensagem F12 Boot Options no canto superior direito da tela
  • Mensagem muda para Preparing one-time boot menu... em verde
• Tela Boot Device Menu é mostrada
  • 1ª opção ( ) vem selecionada
  • Mudar para 4ª opção: System Setup
  • Teclar <ENTER>
• Tela gráfica Dell Inc. OptiPlex 780 mostrada
  • Menu à esquerda como segue:
    • Settings (1º nível)
      • General (2º nível)
        • System Board (3º nível)
          • Nada a fazer, apenas informações para conhecimento
        • Date/Time (3º nível)
          • Atualizar data e hora mudando os valores necessários (AM = antes meio-dia, PM = após meio-dia)
        • Boot Sequence (3º nível)
          • Conferir marcação (coluna esquerda) e ordem (coluna direita) dos dispositivos
      • Drives (2º nível)
        • Diskette Drive (3º nível)
          • Conferir marcação pois dispositivo de disquete não será usado

• • • • Mudar para item SATA Operation (3º nível)
        • Conferir marcação pois dispositivo de disquete não será usado

.

(o) RAID Autodetect / AHCI
( ) RAID Autodetect / ATA
( ) RAID On
( ) Legacy

This field configures the operating mode of the integrated hard drive controller.

RAID Autodetect / AHCI = RAID if signed drives, otherwise AHCI
RAID Autodetect / ATA  = RAID if signed drives, otherwise ATA
RAID On                = SATA is configured for RAID on every boot
Legacy                 = The hard drive controller is configured for legacy mode

Note the legacy mode provides for compatibility with some older operating systems that do
not support native resources assigned to the drive controller.

RAID mode is incompatible with ImageServer. Please disable RAID mode if enabling
ImageServer.

</syntaxhighlight>

• • • • Mudar para item SMART Operation (3º nível)
        • Conferir marcação pois usaremos SMART para monitorar o HD

.

[v] Enable Smart Reporting

This field controls whether hard drive errors for integrated drives are reported during system
setup. This technology is part of the SMART (Self Monitoring Analysis and Reporting
Technology) specification.

</syntaxhighlight>

• • • • Mudar para item Drives (3º nível)
        • Conferir marcação pois usaremos somente interfaces SATA-0 (HD) e SATA-1 (DVD)

.

[v] SATA-0                                       [v] SATA-1
[ ] SATA-2                                       [ ] External SATA

These fields allow the user to enable or disable an ATA or SATA device (such as Hard Drive,
CD Drive, or DVD Drive).

                               (SATA-0)
Controller detais:
* Controller = Serial ATA
* Port       = SATA-0
Device details:
* Drive ID   = WDC WD2500AAJS-75M0A0
* Capacity   = 250GB
* BIOS       = This drive is controlled by the AHCI BIOS

                               (SATA-1)
Controller detais:
* Controller = Serial ATA
* Port       = SATA-1
Device details:
* Drive ID   = TSSTcorp DVD+/-RW TS-H653G

                               (SATA-2)
Controller detais:
* Controller = Serial ATA
* Port       = SATA-2

                               (External SATA)
Controller detais:
* Controller = Serial ATA
* Port       = External SATA

</syntaxhighlight>

• • • Mudar para System Configuration (2º nível)
      • Mudar para item Integrated NIC (3º nível)
        • Conferir marcação pois usaremos NIC sem PXE ou ImageServer

.

( ) Disable
(o) Enable
( ) Enable with PXE
( ) Enable with ImageServer

This field enables and disables the integrated Network Interface Controller (NIC).

Disable                 = Integrated NIC disabled
Enable                  = Integrated NIC enabled
Enable with PXE         = Integrated NIC is on (with PXE enabled)
Enable with ImageServer = Integrated NIC is on (with ImageServer enabled)

Note: ImageServer is incompatible with RAID mode. Please disable RAID if enabling
ImageServer.

Note: PXE is needed only if intending to boot to an operating system located on a server, not
if you are booting to an OS located on a hard drive in this system.

</syntaxhighlight>

• • • • Mudar para item USB Controller (3º nível)
        • Conferir marcação pois dispositivos USB serão permitidos

.

( ) Disable
(o) Enable
( ) No Boot

This field enables and disables the integrated USB controller.

Disable  = The USB controller is disabled
Enable   = The USB controller is enabled
No Boot  = The USB controller is enabled; however, the BIOS will not
           recognize USB storage devices

Note: Operating systems with USB support will recognize USB storage devices regardless of
the "No Boot" setting.

</syntaxhighlight>

• • • • Mudar para item Parallel Port (3º nível)
        • Conferir marcação pois interface paralela não será usada

.

(o) Disable                     ( ) ECP No DMA
( ) AT                          ( ) ECP DMA 1 
( ) PS/2                        ( ) ECP DMA 3
( ) EPP

This option determines how the built-in parallel port operates.

Disable    = Port is disabled
AT         = Port is configured for IBM AT compatibility
PS/2       = Port is configured for IBM PS/2 compatibility
EPP        = Enhanced Parallel Port protocol
EPP No DMA = Extended Capability Port protocol with no DMA
EPP DMA 1  = Extended Capability Port protocol with DMA 1
EPP DMA 3  = Extended Capability Port protocol with DMA 3

</syntaxhighlight>

• • • • Mudar para item Parallel Port Address (3º nível)
        • Como não teremos interface paralela, então este opção não pode ser alterada

.

(o) 378h
( ) 278h
( ) 3BCh

This field selects the base IO address for the integrated parallel port.

</syntaxhighlight>

• • • • Mudar para item Serial Port #1 (3º nível)
        • Como não teremos interface serial, então este opção não pode ser alterada

.

(o) Disable
( ) AUTO
( ) COM1
( ) COM2

This option determines how the built-in serial port operates.

Disable    = Port is disabled
Auto       = BIOS selects between COM1 and COM3
             if both resources are in use, the port is disabled
COM1       = Port is configurated at 3F8h with IRQ 4
COM3       = Port is configurated at 3E8h with IRQ 4

Note: The operating system may allocate resources even though the setting is disabled.

</syntaxhighlight>

• • • • Mudar para item Miscellaneous Devices (3º nível)
        • Conferir marcação pois termos USB Quad e Dual, além de PCI e Audio

.

[ ] Front USB                                  [v] Rear Quad USB
[v] Rear Dual USB                              [v] PCI Slots
[v] Audio

These fields let you enable or disable various system devices.

</syntaxhighlight>

• • • Mudar para item Video (2º nível)
      • Mudar para item Primary Video (3º nível)
        • Conferir marcação pois teremos placa gráfica PCI Express neste servidor

.

(o) Auto
( ) Onboard/Card

This field determines which video controller will become the primary video controller when 2
controller are available in the system. This selection matters only if there are 2 video
controllers present.

Auto         = Use the add-in video controller
Onboard/Card = Use the integrated video controller unless a Graphics card
               is installed. A PCI Express Graphics (PEG) card will override
               and disable the integrated video controller.

</syntaxhighlight>

• • • Mudar para item Performance (2º nível)
      • Mudar para item Multi Core Support (3º nível)
        • Conferir marcação pois usaremos CPU multi core

.

[v] Enable Multi Core Support

This field specifies whether the processor will have one or all cores enabled. The
performance of some applications will improve with the additional cores.

</syntaxhighlight>

• • • • Mudar para item Intel(R) SpeedStep(TM) (3º nível)
        • Conferir marcação pois usaremos esta facilidade da Intel(R)

.

[v] Enable Intel(R) SpeedStep(TM)

This option enables or disables the Intel(R) SpeedStep(TM) mode of the processor.
When disabled, the system is placed into the highest performance state and the Intel(R)
SpeedStep(TM) applet or native operating system driver are prevented from adjusting the
processor's performance. When enabled, the Intel(R) SpeedStep(TM)-enabled CPU is allowed to
operate in multiple performance states.

</syntaxhighlight>

• • • • Mudar para item C States Control (3º nível)
        • Conferir marcação pois não usaremos esta função do processador

.

[ ] C States Control

This option enables or disables additional processor sleep states.
The operating system may optionally use these for additional power savings when idle.

</syntaxhighlight>

• • • • Mudar para item Limit CPUID Value (3º nível)
        • Conferir marcação pois não usaremos esta limitação do processador

.

[ ] Enable CPUID Limit

This field limits the maximum value the processor Standard CPUID Function will support.
Some operating systems will not complete installation when the maximum CPUID Function
supported is greater than 3.

</syntaxhighlight>

• • • Mudar para item Virtualization Support (2º nível)
      • Mudar para item Virtualization (3º nível)
        • Conferir marcação pois usaremos esta facilidade na virtualização

.

[v] Enable Intel(R) Virtualization Technology

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel(R) Virtualization Technology.

</syntaxhighlight>

• • • • Mudar para item VT for Direct I/O (3º nível)
        • Conferir marcação pois usaremos esta facilidade na virtualização

.

[v] Enable Intel(R) VT for Direct I/O

This option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel(R) Virtualization Technology for Direct I/O.

</syntaxhighlight>

• • • Mudar para item Security (2º nível)
      • Mudar para item Administrator Password (3º nível)
        • Digitar password mestre conforme frase "Gott ist ein Popstar"

.

Enter the old password: [_______________________________________________]   Password Set
Enter the new password: [_______________________________________________]
  Confirm new password: [_______________________________________________]   [OK]

The Administrator password is used to prohibit an unauthorized user from changing any
configuration settings. To remove this password, enter the blank password at the "New" and
"Confirm" prompts above.

</syntaxhighlight>

• • • • Mudar para item System Password (3º nível)
        • Não digitar password pois não usaremos este nível de proteção da BIOS

.

Enter the old password: [___________________Not Set_____________________]   
Enter the new password: [___________________(blank)_____________________]
  Confirm new password: [___________________(blank)_____________________]   [OK]

The System password is used to prohibit an unauthorized user from booting.

</syntaxhighlight>

• • • • Mudar para item Password Changes (3º nível)
        • Conferir marcação pois usaremos este nível de proteção da BIOS

.

[v] Enable Password Changes

This field controls the interaction between the system password and the administrator
password. If enabled, the system password may be modified or deleted without having
knowledge of the administrator password. If disabled, a valid administrator password is
required to modify or delete the system password.

</syntaxhighlight>

• • • • Mudar para item TPM Security (3º nível)
        • Facilidade não habilitada portanto não pode ser alterada

.

[ ] TPM Security
(o) Deactivate
( ) Activate
( ) Clear

This option lets you control whether the Trusted Platform Module (TPM) in the system is
enable or visible to the operation system. When disabled, the BIOS will not turn on the
TPM during POST. The TPM will be non-functional and invisible to the operating system.
When enabled, the BIOS will turn on the TPM  during POST so that it can be used by the
operating system.

NOTE: Disabling this option does not change any settings you may have made to the TPM,
nor does it delete or change any information or keys you may have stored there. It simply
turns off the TPM so that it cannot be used. When you re-enable this option, the TPM will
function exactly as it did before it was disable.

When the TPM is in the enabled state you have the ability to control whether the TPM is 
deactivated and disabled or acitivated and enabled. It also allows you to clear the ownership
information in the TPM (if any). Physical presence is implied when you make a change to this
option. When "Deactivate" the TPM will be deactivated and disabled. It will not execute any
commands that use the resources of the TPM, nor wil it allow any access to stored owner
information. When "Activate" the TPM will be enabled and activated. This is the normal
operating state for the TPM when you want to use its complete array of capabilities. When
"Clear" the BIOS clears the owner information stored in the TPM. Use this setting to restore
the TPM to its default state if you lose of forget the owner authentication data.

NOTE: Activation, deactivation and clear options are not affected if you load the setup
program's default values. Changes to this option take effect immediately.

</syntaxhighlight>

• • • • Mudar para item CPU XD Support (3º nível)
        • Conferir marcação pois usaremos este recurso de segurança

.

[v] Enable CPU XD Support

Execute-Disable Bit Capability

This option enables or disables the Execute Disable mode of the processor. The operating
system can use this feature to hinder software that exploits buffer overflows.

</syntaxhighlight>

• • • • Mudar para item Computrace(R) (3º nível)
        • Conferir marcação pois não usaremos este recurso de segurança

.

(o) Deactivate
( ) Disable
( ) Activate

This field lets you Activate or Disable the BIOS module interface of the optimal
Computrace(R) Service from Absolute(R) Software.

The Computrace(R) agent from Absolute(R) Software is a service solution designed to help
track assets and provide recovery services in the event the computer is lost or stolen. The
Computrace(R) agent communicates with the Absolute(R) Software Monitoring Server at 
programmed intervals to provide the tracking service. By activating the service, you consent
to the transmission of information from and to your computer and the Absolute(R) Software
Monitoring Server. The Computrace(R) service is purchased as an option and the monitoring
Server will enable its agent security module through an inteface provided by the BIOS.
Computrace(R) and Absolute(R) are registred trademarks of Absolute(R) Software Corporation.

Deativate  = The Computrace(R) module interface is not acitive.
Disable    = Permanently block the Computrace(R) module interface.
Activate   = Permit the Computrace(R) module interface.

The Absolute(R) Anti-Theft solution is presently Deactivated. Note that the Activate or Disable
options will permanently Activate or Disable the feature and no further changes will be
allowed.

</syntaxhighlight>

• • • • Mudar para item Chassis Intrusion (3º nível)
        • Conferir marcação pois usaremos este recurso de segurança

.

[ ] Clear Intrusion Warning
( ) Disable
(o) Enable
( ) On-Silent

This option controls the chassis intrusion feature.

Disable   = Disable the intrusion detection feature
Enable    = Enable the intrusion detection feature and report intrusions during POST
On-Silent = Enable the intrusion detection feature but do not display any
            detected intrusions during POST

A chassis intrusion has been detected. Select "Clear Intrusion Warning" to acknowledge and
clear this event. The system will then be armed to look for future security breaches.

</syntaxhighlight>

• • • • Mudar para item SATA-0 Password (3º nível)
        • Não digitar password pois não usaremos este nível de proteção da BIOS

.

Enter the old password: [___________________Not Set_____________________]   
Enter the new password: [___________________(blank)_____________________]
  Confirm new password: [___________________(blank)_____________________]   [OK]

The drive password is used to prohibit an unauthorized user from using your drive.

</syntaxhighlight>

• • • Mudar para item Power Management (3º nível)
      • Mudar para item AC Recovery (3º nível)
        • Conferir marcação pois usaremos este recurso de gerenciamento de energia

.

( ) Power Off
(o) Power On
( ) Last Power State

This field specifies how the system will behave when AC power is restored after an AC
power loss.

Power Off        = System stays off after AC power is restored
Power On         = System powers on after AC power is restored
Last Power State = System returns to the previous state after AC power recovery

</syntaxhighlight>

• • • • Mudar para item Auto On Time (3º nível)
        • Conferir marcação pois não usaremos ligamento automático

.

                                 12 : 00  AM
                                 HH   MM  A/P

                                 (o) Disable
                                 ( ) Every Day
                                 ( ) Weekdays

This option sets the time of day you would like the system to turn on automatically.

Disable   = The system will not automatically turn on
Every Day = The system will power on every day at the time specified above
Weekdays  = The system will power on Mondey through Friday at the time
            specified above

</syntaxhighlight>

• • • • Mudar para item Low Power Mode (3º nível)
        • Conferir marcação pois usaremos este recurso de gerenciamento de energia

.

[v] Enable Low Power Mode

This field determines how aggressive the system is at conserving power while shutdown or
in Hibernate mode. When this option is enabled, more power is conserved.

Note: With this option enabled, the integrated NIC will be disabled when the system is
shutdown or in Hibernate mode. Only add-in NIC cards will be able to remotely wake the
system.

</syntaxhighlight>

• • • • Mudar para item Remote Wake Up (3º nível)
        • Conferir marcação pois usaremos este recurso de ligamento remoto

.

( ) Disable
(o) Enable
( ) Enable with Boot to NIC

The system can be be powered up remotely from Suspend, Hibernate, of Off. When Low Power
Mode (located in the Power Management group) is enabled, the system can only be powered
up from Suspend mode. If Remote Wake Up from Hibernate of Off is also required, Low
Power Mode must be disabled.

Disable                 = NIC cannot wake up the system
Enable                  = NIC can wake up the system
Enable with Boot to NIC = NIC can wake up the system, and teh system will boot
                          from the network

</syntaxhighlight>

• • • • Mudar para item Suspend Mode (3º nível)
        • Conferir marcação pois usaremos este recurso de economia de energia

.

( ) S3
(o) S1

This field selects the power management suspend mode.

S3 = System conserves more power when not in use
S1 = System resumes more quikly from sleep mode

</syntaxhighlight>

• • • • Mudar para item Fan Control Override (3º nível)
        • Conferir marcação pois não usaremos este controle de ventilador

.

[ ] Fan Control Override

This field determines the speed of the system fan.

When enabled, the system fan runs at full speed. WARNING: The system fan is very loud at
full speed.
When disabled, the fan controller uses system environment data to set the fan at its
optimal speed.

</syntaxhighlight>

• • • Mudar para item Maintenance (2º nível)
      • Mudar para item Service Tag (3º nível)
        • Conferir valor indicado mas não alterá-lo

.

                                         [HXCKQN1]

This field display your system's Service Tag.
If the Service Tag was not already set, you would be able to use this field to set it.

</syntaxhighlight>

• • • • Mudar para item Asset Tag (3º nível)
        • Nada fazer, mesmo estando sem valor

.

                                         [_______]

This field allows you to create a system Asset Tag. The field can only be updated is the Asset
Tag is not already set.

</syntaxhighlight>

• • • • Mudar para item SERR Messages (3º nível)
        • Conferir marcação pois usaremos permitiremos essas mensagens

.

[v] Enable SERR Messages

This field controls the SERR message mechanism. Some graphics cards require that the
SERR message mechanism be disabled.

</syntaxhighlight>

• • • Mudar para item ImageServer (2º nível)
      • Mudar para item Lookup Method (3º nível)
        • Não alterar as marcações pois ImageServer não será usado neste servidor

.

( ) Static IP
(o) DNS

This field specifies how the ImageServer software will lookup server addresses.

DNS       = ImageServer software will obtain server IP addresses using the Domain Name
            System (DNS) protocol.
Static IP = ImageServer software will use static server IP addresses.

The factory default setting is DNS.

Note: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enable with ImageServer".

</syntaxhighlight>

• • • • Mudar para item ImageServer IP (3º nível)
        • Não alterar os valores pois ImageServer não será usado neste servidor

.

[255] [255] [255] [255]

This field specifies the primary static IP address of the ImageServer with the client
software communicates.

The factory default setting is 255.255.255.255.

Note: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enable with ImageServer" and when "Lookup Method" is set to
"Static IP".

</syntaxhighlight>

• • • • Mudar para item ImageServer Port (3º nível)
        • Não alterar os valores pois ImageServer não será usado neste servidor

.

                                             [06910]

This field specifies the primary IP port of the ImageServer with the client software
communicates.

The factory default setting is 06910.

Note: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enable with ImageServer".

</syntaxhighlight>

• • • • Mudar para item Client DHCP (3º nível)
        • Não alterar os valores pois ImageServer não será usado neste servidor

.

( ) Static IP
(o) DHCP

This field specifies how the client will obtain the IP address.

DHCP      = Client will obtain IP address using the Dynamic Host Configuration
            Protocol (DHCP).
Static IP = Client will use static IP addresses.

The factory default setting is DHCP.

Note: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enable with ImageServer".

</syntaxhighlight>

• • • • Mudar para item Client IP (3º nível)
        • Não alterar os valores pois ImageServer não será usado neste servidor

.

[255] [255] [255] [255]

This field specifies the static IP address of the client.

The factory default setting is 255.255.255.255.

Note: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enable with ImageServer" and when "Client DHCP" is set to
"Static IP".

</syntaxhighlight>

• • • • Mudar para item Client SubnetMask (3º nível)
        • Não alterar os valores pois ImageServer não será usado neste servidor

.

[255] [255] [255] [255]

This field specifies the subnet mask of the client.

The factory default setting is 255.255.255.255.

Note: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enable with ImageServer" and when "Client DHCP" is set to
"Static IP".

</syntaxhighlight>

• • • • Mudar para item Client Gateway (3º nível)
        • Não alterar os valores pois ImageServer não será usado neste servidor

.

[255] [255] [255] [255]

This field specifies the gateway of the client.

The factory default setting is 255.255.255.255.

Note: This field is only relevant when the "Integrated NIC" control in the "System
Configuration" group is set to "Enable with ImageServer" and when "Client DHCP" is set to
"Static IP".

</syntaxhighlight>

• • • • Mudar para item Licence Status (3º nível)
        • Não alterar os valores pois ImageServer não será usado neste servidor

.

On-demand Desktop Streaming with EasyConnectTM Embedded Licence Status

No License

</syntaxhighlight>

• • • Mudar para item Post Behavior (2º nível)
      • Mudar para item Fast Boot (3º nível)
        • Conferir marcação pois usaremos este recurso

.

[v] Enable Fast Boot

This option can speed up the boot process by bypassing some compatibility steps.

</syntaxhighlight>

• • • • Mudar para item Numlock LED (3º nível)
        • Conferir marcação pois usaremos este recurso

.

[v] Enable Numlock LED

This option specifies whether the NumLock LED should be on when the system boots.

</syntaxhighlight>

• • • • Mudar para item POST Hotkeys (3º nível)
        • Conferir marcação pois usaremos este recurso

.

[v] Enable F12 = Boot Menu

These fields specifies whether the sign-on screen displays a message stating the keystroke
sequence required to enter the Setup program or the QuickBoot feature.

</syntaxhighlight>

• • • • Mudar para item Keyboard Errors (3º nível)
        • Conferir marcação pois não usaremos este recurso

.

[ ] Enable Keyboard Error Detection

This field specifies whether keyboard related errors are reported when the system boots.

</syntaxhighlight>

• • • • Mudar para item MEBx Hotkey (3º nível)
        • Conferir marcação pois usaremos este recurso

.

[v] Enable MEBx Hotkey

This field specifies whether the sign-on sreen display a message stating the keystroke
sequence required to enter the Manageability Engine BIOS Extensions (MEBx) Setup
program.

</syntaxhighlight>

• • • • Mudar para item OS Install (3º nível)
        • Conferir marcação pois não usaremos este recurso

.

[ ] OS Install

This field determines the maximum amount of system memory availeble to the operating
system. Some operating systems will not complete installation with more than 2 GB of
system memory. If enabled the maximum available memory is 256 MB.

</syntaxhighlight>

• • • Mudar para item System Logs (2º nível)
      • Mudar para item BIOS Events (3º nível)
        • Tela de monitoramento para quando sistema estiver em funcionamento

.

[Clear Log]      [Mark All Entries]

  DATE      TIME       TYPE                           DATA
------------------------------------------------------------------------
U 08/25/10  19:35:38   Log Area Cleared               NONE
U 11/19/10  17:31:08   Out Of Range                   Chassis Intrusion

</syntaxhighlight>